Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Elevate knob satin gold identifies this Berenson Elevate Series knob as a satin gold option that coordinates with other Elevate pieces, which matters when you want a consistent finish across doors and drawers on the same run. The 1-3/16 inch, or 30 mm, diameter head defines the fingertip contact area, giving installers a clear sense of scale for cabinet fronts and smaller doors. The 1-1/2 inch length or diameter dimension provides another size reference, helping layout decisions when mixing knobs and pulls in a kitchen or bath. A 19/32 inch base diameter sets the footprint on the cabinet surface, which is important when covering previous imprint marks or matching rail and stile widths. The 7/8 inch projection describes how far the knob stands off the face, giving enough clearance for a solid grip without pulling the hand too far from the door.
The 1-3/16 inch diameter gives a clear reference point for setting centerlines on rails and drawer fronts, which helps keep sight lines even when repeating the knob across multiple cabinets. The 1-1/2 inch length or diameter figure further clarifies overall knob scale, supporting layout decisions when spacing knobs side by side on wide drawers. A base diameter of 19/32 inch defines the contact circle against the wood, which is important when aligning to narrow rails or existing finish transitions. The 7/8 inch projection tells you how far the knob stands off the front, so you can assess hand clearance relative to adjacent walls, trim, or appliance handles.
As a Berenson Elevate Series satin gold knob, this piece is suited to cabinet projects where a coordinated Elevate look is desired, because the collection reference ties it to matching designs. The 1-3/16 inch, or 30 mm, diameter size works across kitchens, baths, and built-ins that use standard cabinet door sizes, since it offers a balance between visual presence and compact footprint. With a 19/32 inch base diameter, the knob seats on a relatively small circle of surface area, which helps it sit cleanly on narrow rails or slim drawer fronts without crowding panel details. The 7/8 inch projection adds functional depth off the cabinet face, which is useful on doors near casing or tight returns where deeper hardware could feel crowded. Zinc construction supports decorative hardware use in typical cabinetry settings, providing a metal body suited to everyday door and drawer operation.
The 1-3/16 inch diameter offers a predictable edge-to-edge size, which simplifies jig setup when drilling repeated knob locations along a bank of doors or drawers. The 1-1/2 inch length or diameter value gives another clear measurement, helping installers visualize how the knob relates to stile widths and drawer rail heights before committing to a layout. With a 19/32 inch base diameter, the bearing surface stays well inside most face frame widths, supporting precise alignment to centerlines without overlapping into surrounding profiles. The 7/8 inch projection keeps the gripping point consistent from door to door, reducing variation in hand feel across an entire run of cabinetry. The satin gold finish specification helps coordinate multiple knobs in the same finish family, supporting consistent visual results when combining this knob with other satin gold decorative hardware on the job.
The Berenson Elevate Series satin gold knob has a 1-3/16 inch, or 30 mm, diameter, giving a moderate contact area that suits typical cabinet doors and drawer fronts.
The satin gold knob has a 7/8 inch projection from the cabinet face, providing enough stand-off for a comfortable grip while staying close to surrounding doors and trim.
The 2173-10SG-P knob has a 19/32 inch base diameter, creating a compact footprint on the cabinet surface that works well on narrow rails and drawer fronts.
This Berenson Elevate Series knob is made from zinc, giving it a metal body suited to decorative cabinet hardware applications in everyday use.
The satin gold Elevate knob uses an 8-32 screw size in a 1 inch length, matching common cabinet knob installation patterns for standard door and drawer thicknesses.
The Berenson 2173-10SG-P knob has a satin gold finish, allowing it to coordinate with other satin gold decorative hardware across the same project.
This Berenson Elevate Series satin gold knob combines a 1-3/16 inch diameter, 19/32 inch base, and 7/8 inch projection to give clear sizing for planned layouts on doors and drawers. The zinc construction and satin gold finish align with decorative hardware needs on cabinet projects that call for a coordinated Elevate look. Using the specified 8-32 x 1 inch screw size with these dimensions supports consistent placement and hand feel across an entire run, helping keep completed cabinetry visually aligned. Choose this knob when those exact measurements, finish, and collection match the requirements of your next installation.
