
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Swagger Series slate knob gives cabinets a 1-3/16 inch diameter pull point, so doors and drawers have a consistent hand feel across a run. The zinc construction provides a solid metal knob body, which supports dependable day-to-day operation on active cabinet fronts. The slate finish presents a darker tone on the face of the knob, which helps visually define each pull location against lighter cabinet surfaces. A 7/8 inch base diameter sets a clear landing area on the door or drawer, which helps cover the typical bore area around the mounting hole. The 1-1/4 inch projection spaces the grip away from the cabinet face, which allows fingers to wrap the knob without rubbing the finished surface. The matched 1-3/16 inch width ties the plan view and front view together, which keeps layout straightforward when repeating this knob across a full installation.
The 1-3/16 inch diameter on this Berenson knob defines the overall face size, which guides drilling layout when spacing knobs evenly across a cabinet run. The 7/8 inch base diameter sets the contact circle against the wood, which influences how much of the surrounding finish remains visible around the knob. The 1-1/4 inch projection establishes working depth from the mounting surface, which helps keep fingers clear of door edges as the knob is pulled. The specified 8-32 thread with 1 inch length provides a defined screw size, which aligns with standard cabinet boring and gives a clear target when matching to typical door and drawer thicknesses.
This Berenson Swagger Series slate knob functions as a cabinet knob within the decorative hardware group, so it suits use on cabinet doors and drawer fronts in woodworking projects. The 1-3/16 inch diameter keeps the knob visually proportional on standard cabinet faces, which supports use on both base and wall units. The 7/8 inch base diameter helps the knob sit cleanly over the drilled hole, which suits typical 3/16 inch or similar bores used in cabinet shops. The zinc material positions the knob within metal decorative hardware lines, which works alongside other metal parts in a project. The slate finish places the knob in a darker color family, which fits design schemes that call for slate-toned decorative hardware against painted or stained cabinetry.
The defined 1-3/16 inch width on this knob gives installers a fixed face size, which helps when aligning multiple knobs along a rail or across drawer banks so spacing stays consistent. The 1-1/4 inch projection sets a repeatable stand-off, which helps maintain a uniform gap between grip points and the cabinet faces across an entire installation. The 8-32 x 1 inch screw specification gives a clear thread and length reference, which allows fabricators to drill and tap for a known fastener standard across doors and drawers. The 7/8 inch base diameter provides a consistent landing area on the cabinet surface, which supports neat visual alignment when centering the base over layout marks. Together these fixed measurements allow shops and installers to repeat drilling patterns and hardware placement from cabinet to cabinet without reworking dimensions.
The Berenson Swagger Series slate knob has a 1-3/16 inch (30 mm) diameter, which defines the face size used for layout and gives a compact grip for cabinet doors and drawers.
The knob projects 1-1/4 inch from the mounting surface, which spaces the grip away from the cabinet face so fingers can pull without rubbing the door or drawer front.
The Berenson 2389-1SLT-P knob uses an 8-32 x 1 inch screw size, which ties directly to a common cabinet hardware thread standard used in many shop and field installations.
The Swagger slate cabinet knob is made from zinc, which provides a solid metal body suitable for repeated pulling on active cabinet doors and drawers.
The knob has a 7/8 inch base diameter, which defines the contact area on the cabinet surface and helps cover the drilled hole around the mounting point.
The Berenson Swagger slate knob has a width of 1-3/16 inch, which matches its listed diameter and supports consistent visual sizing across a cabinet run.
The Berenson Swagger Series slate knob pairs a 1-3/16 inch diameter with zinc construction, which delivers a defined metal pull point for cabinet doors and drawers. The 1-1/4 inch projection and 7/8 inch base diameter give clear stand-off and contact dimensions, which help plan drilling patterns and visual spacing across multiple fronts. With the 8-32 x 1 inch screw specification and slate finish, this knob aligns with standard cabinet hardware threads and a specific color tone, which supports coordinated hardware selection on your next cabinet project.