128mm Swagger Handle Pull, Slate

128mm Swagger Handle Pull For Cabinet Projects

128mm Swagger handle pull is a zinc cabinet handle from the Berenson Swagger collection that provides a coordinated look across multiple doors and drawers, which helps keep a run of cabinetry visually consistent on finished jobs. The slate finish gives the pull a darker, neutral tone that works with a range of door colors, so you can tie together mixed materials without changing hardware style. With a center to center of 5-1/16 inches (128 mm), this pull fits layouts designed around common metric drilling patterns, which simplifies layout when you are working off shop jigs. The overall length of 5-1/2 inches gives good hand clearance across standard cabinet widths, which supports comfortable use on both doors and medium-size drawers. A projection of 1-1/4 inches keeps fingers clear of the cabinet face, which helps reduce knuckle contact on thicker door styles.

Practical Details Of The Swagger Cabinet Pull

• The center to center dimension of 5-1/16 inches (128 mm) sets a consistent hole spacing, which lets you repeat drilling patterns across a kitchen or bank of casework without recalculating each location.
• The 5-1/2 inch length provides a handle that spans more of the door or drawer front, which can feel balanced on wider fronts and can give users a broader gripping area in everyday use.
• The 1-1/4 inch projection creates space between the pull and the cabinet surface, which helps hands clear decorative door profiles while opening and closing doors under load.
• The 5/8 inch width offers a slim front edge, which keeps the pull from visually overpowering narrow rails while still presenting enough surface to grasp comfortably during repeated use.
• The 1/2 inch base diameter at each mounting point creates a defined footprint, which can help cover minor machining marks at the hole area and present a clean transition to the cabinet face.
• The slate finish on this Swagger pull provides a muted, modern tone, which can tie in with other dark hardware or fixtures on the same project for a unified appearance.

Installation Fit Of The 128mm Swagger Pull

The 128 mm center to center spacing on this Swagger pull matches a common metric drilling pattern, which allows use with standard cabinet templates and jigs that are already set for 128 mm hardware. The 5-1/2 inch overall length leaves modest overhang beyond the mounting holes, which helps the pull sit proportionally on doors without crowding adjacent hardware locations. With a projection of 1-1/4 inches, there is enough stand-off from the cabinet face for fingers to wrap behind the pull, which is important when users are pulling heavier drawer loads. The 5/8 inch width creates a narrow front profile, which can be useful on face frames or slab fronts where space between pulls is limited. A base diameter of 1/2 inch around each mounting point provides a defined contact area, which can help the pull seat firmly against flat cabinet surfaces.

Using The Swagger Pull On Cabinets And Drawers

Where The 128mm Swagger Handle Pull Works Best

The 128mm Swagger handle pull from Berenson is part of the Swagger collection, which is useful when you want a consistent design language across doors and drawers in the same project. The 128 mm center to center measurement aligns with many European-style cabinet layouts, which suits frameless installations and any project laid out around metric hardware spacing. Its 5-1/2 inch length lets the pull sit comfortably on both base and wall cabinet doors, which keeps the scale of the hardware in line with typical residential cabinet sizes. The 1-1/4 inch projection works well on doors with varying panel profiles, because it keeps the gripping area away from raised or profiled center panels. With a 5/8 inch width, this pull presents a slim line on narrow drawer fronts, which helps maintain clean lines on modern slab cabinetry.

Why The Swagger Pull Dimensions Support Consistent Results

The specified 5-1/16 inch (128 mm) center to center dimension on this Swagger pull provides a fixed reference for drilling, which supports precise repeatability when you are batching multiple cabinet fronts. The overall length of 5-1/2 inches means the ends of the handle extend slightly beyond the mounting points, which gives users a defined gripping span even when their hands do not land exactly at the screw locations. A projection of 1-1/4 inches spaces the handle away from the cabinet, which helps prevent fingers from rubbing against finished surfaces during regular use. The 5/8 inch width and 1/2 inch base diameter work together to keep the visual mass of the pull controlled, which can reduce the risk of hardware overwhelming narrower rails while still covering the immediate area around the drilled holes. The zinc material provides a solid-feeling pull body, which supports repeated opening and closing cycles on active doors and drawers.

Common Questions About The Swagger Slate Handle Pull

Selecting The 128mm Swagger Pull For Your Job

The 128mm Swagger handle pull in slate from Berenson pairs a 5-1/16 inch (128 mm) center to center with a 5-1/2 inch overall length, which fits common drilling patterns while offering a comfortable grip span. Its 1-1/4 inch projection and 5/8 inch width provide practical clearance and a slim profile, which work well across both doors and drawers. The zinc construction and slate finish deliver a consistent look within the Swagger collection, which helps you carry one hardware style through an entire project. For cabinet work that calls for a 128 mm center to center pull in a dark, neutral finish, this Swagger handle pull aligns cleanly with those layout and design requirements.