Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
160mm Swagger decorative bar pull sets up a straightforward way to handle cabinet and furniture openings where a modern bar style is desired. Made by Berenson Corporation as part of the Swagger collection, this pull creates a consistent look when you are matching multiple doors and drawers in the same run. The zinc material gives a solid-feeling grip point during everyday use, which supports reliable operation on frequently used fronts. A slate finish defines the color tone of the pull, letting you line it up with other slate hardware choices in the same project. With a bar design that ties back to the Swagger collection, the pull helps maintain a unified hardware style from piece to piece. This combination of defined center spacing, collection matching, and slate finish helps installers plan layouts that feel intentional and repeatable.
This Swagger pull uses a 6-5/16 inch (160 mm) center to center measurement, aligning drill points for installers who favor metric-based cabinet layouts. The 6-3/4 inch overall length positions the bar slightly past the mounting centers, which helps visually center the pull on wider drawer fronts. A 1-1/4 inch projection determines how far the handle stands off the face, affecting both knuckle clearance and how the pull interacts with adjacent cabinetry. With a 5/8 inch width, the bar maintains a manageable profile for drilling near door edges without crowding neighboring hardware. Each mounting point uses a 1/2 inch base diameter, which defines how the pull seats over any finishing variations at the mounting locations. The slate finish locks in the color and surface appearance, supporting consistent visual alignment across all Swagger pulls on the job.
The Swagger pull from Berenson Corporation is defined by its 6-5/16 inch (160 mm) center to center size, which lines up well with cabinet and furniture applications designed around that hole spacing. Because the overall length is 6-3/4 inches, the pull suits medium-width cabinet doors and common drawer sizes where a bar that slightly exceeds the mounting spread feels proportional. A 1-1/4 inch projection sets the bar away from the cabinet face enough for routine gripping tasks on kitchen, bath, or shop storage without forcing hands too far from the door plane. With a 5/8 inch width, the bar profile presents a clear handle without dominating narrow rails, which supports use across mixed cabinet sizes in a single installation. The slate finish gives the pull a specific visual identity, helping coordinate projects that rely on slate-colored decorative hardware as a unifying detail through all cabinetry.
The precise 160 mm center to center measurement on this Swagger decorative bar pull allows jigs and drilling templates to be set once and reused, reducing layout variation on multi-cabinet runs. Its 6-3/4 inch overall length provides predictable edge clearances when centered on standard fronts, which simplifies planning handle locations relative to door edges and drawer sides. The 1-1/4 inch projection creates a consistent stand-off from the surface, so clearances between adjacent doors, panels, and pulls can be evaluated using a single known value. With a 5/8 inch bar width, fabricators can anticipate how much visual weight the pull adds to face frames and slab fronts, supporting design decisions before holes are drilled. The 1/2 inch base diameter creates a defined contact ring at each mounting point, which helps mask minor surface irregularities around the drilled holes once the pull is fastened in place. Together, these fixed Swagger dimensions help streamline layout, drilling, and final alignment across both small and large cabinet projects.
The 160mm Swagger decorative bar pull has a 6-5/16 inch (160 mm) center to center dimension, which sets the drilling distance between mounting holes for consistent cabinet layouts.
The 160mm Swagger decorative bar pull measures 6-3/4 inches in overall length, so the bar extends slightly beyond the mounting centers for a balanced look on doors and drawers.
The Swagger pull has a 1-1/4 inch projection, meaning it stands that distance off the cabinet face to provide finger clearance during everyday opening and closing.
The 2392-1SLT-P Swagger pull is made of zinc, giving the handle a solid-feeling grip point while supporting the application of its slate finish.
The 160mm Swagger decorative bar pull uses a slate finish, which defines the color tone so it can be matched with other slate hardware in the same project.
The Swagger pull has a 5/8 inch width and a 1/2 inch base diameter, shaping the bar profile and mounting footprint that show on the cabinet face after installation.
The 160mm Swagger decorative bar pull in slate combines a defined 6-5/16 inch (160 mm) center to center with a 6-3/4 inch overall length, giving installers clear drilling and placement values. Its 1-1/4 inch projection and 5/8 inch width describe how it will feel and function on doors and drawers. The zinc construction and slate finish anchor the visual and tactile character of the pull, matching projects that call for slate-colored bar hardware. For cabinet and furniture work built around the Swagger collection and 160 mm spacing, this Berenson pull offers a consistent set of measurements for planning straight, repeatable hardware runs.
