Berenson Domestic Bliss Series 3-3/4" (96 mm) Center to Center Matte Black Pull, - 2400-1055-P
Description
Berenson Domestic Bliss Pull For Cabinet Projects
Berenson Domestic Bliss pull gives cabinets a 3-3/4 inch center to center grip in a compact 4-1/2 inch overall length, so doors and drawers get a consistent hand feel without crowding surrounding fronts. The 96 mm center to center dimension helps layout spacing on metric-based cabinet runs, which simplifies drilling patterns when mixing imperial and metric casework. A matte black finish keeps light reflection down, which helps this pull sit quietly on both light and dark fronts in kitchens, baths, or shop storage. Zinc construction provides a solid, uniform body for the pull, giving a predictable feel when opening heavier drawers or tall pantry doors. With Domestic Bliss series styling, this pull matches other pieces in the same line, which supports a unified look when hardware needs to run through multiple rooms or zones on a project.
Key Details Of This Matte Black Pull
- The 3-3/4 inch (96 mm) center to center size sets the mounting holes, which allows straightforward swaps on cabinets already drilled for this common spacing.
- The 4-1/2 inch length sets the overall footprint, which helps when checking clearances near edge profiles, neighboring pulls, or face frame rails.
- The 1-3/8 inch projection provides hand clearance off the door or drawer face, which supports a comfortable grip without pulling knuckles into the surface.
- The 5/8 inch width keeps the pull visually slim, which helps it work on narrow drawer fronts or small doors without overpowering the rail and stile layout.
- The 3/4 inch base diameter at each post defines the contact area on the cabinet face, which matters when aligning pulls over existing finish transitions or filler strips.
- The zinc material gives the pull a consistent, machined feel, which supports a uniform experience across all doors and drawers on a job.
Installation Sizing And Mounting Fit Details
The 96 mm center to center drilling dimension sets clear hole locations, which makes layout easy when using jigs or story sticks for repetitive cabinet runs. A 3-3/4 inch center to center length also aligns with many existing residential cabinet patterns, which suits replacements where only the old hardware is changing. The 4-1/2 inch overall length defines how close this pull sits to door edges or drawer sides, important when working around tight reveals or decorative profiled edges. With a 1-3/8 inch projection, the pull stands off the face enough for a full finger hook, which is helpful on heavier drawers or tall doors where leverage matters. The 5/8 inch width and 3/4 inch base diameter set how the pull visually lands on the rail, which helps coordinate with frame sizes and panel proportions.
Using This Domestic Bliss Pull In Projects
Domestic Bliss Pull Placement On Cabinets
This Domestic Bliss series pull sits on cabinet doors and drawers using its 3-3/4 inch (96 mm) center to center posts, which anchors the handle at a predictable span for everyday use. That 96 mm spacing works along both frameless and face frame cabinet designs where drilling patterns are already standardized, so layout lines can be repeated across a kitchen, bath, or office install. The 4-1/2 inch overall length keeps the grip compact on narrower drawer fronts, which helps retain proportion on smaller bath vanities or upper cabinets. With a 1-3/8 inch projection off the face, the pull creates enough space for fingers even when mounted near thicker door edges or applied moldings. The 3/4 inch base diameter meets the cabinet surface with a defined footprint, which can visually bridge between stiles, rails, and flat panel sections on a door.
Details That Support Consistent Cabinet Results
The matte black finish on this pull manages reflections and glare, which keeps sightlines clean across a run of cabinets under task lighting or sunlight. Because the center to center size is clearly set at both 3-3/4 inches and 96 mm, jig setups can be dialed in once and repeated, supporting consistent hole alignment and reducing layout time across multiple boxes. The 5/8 inch width helps the pull sit neatly on narrow rails, which can reduce visual crowding when several drawers are stacked vertically. Zinc material in the pull body provides a solid, single-piece feel, which keeps the hand experience similar from one cabinet to the next when hardware counts go up. The 1-3/8 inch projection establishes a steady stand-off distance, which can help align this pull visually with other hardware lines that use similar projection on the same job.
Common Questions About This Berenson Cabinet Pull
What is the center to center size of this pull?
The pull has a 3-3/4 inch (96 mm) center to center size, which sets the hole spacing on doors and drawers and helps match many existing drilling patterns.
How long is the Berenson Domestic Bliss pull overall?
The Berenson Domestic Bliss pull has a 4-1/2 inch overall length, which defines its footprint on the cabinet front and helps with layout near edges and profiles.
What projection does this matte black pull provide?
The pull projects 1-3/8 inch off the cabinet surface, giving finger clearance for a comfortable grip on doors and drawers, even on heavier fronts.
What material is the Domestic Bliss series pull made from?
The Domestic Bliss series pull is made from zinc, which provides a solid, consistent handle body and a uniform feel across multiple cabinets.
What finish does the Berenson 2400-1055-P pull have?
The Berenson 2400-1055-P pull has a matte black finish, which keeps reflections low and pairs well with both light and dark cabinet colors.
Which series is this Berenson cabinet pull part of?
This cabinet pull is part of the Domestic Bliss collection, which helps maintain a consistent style when using matching pieces across a project.
Selecting This Pull For Cabinet Installations
The Berenson Domestic Bliss pull with 3-3/4 inch (96 mm) center to center sizing, zinc construction, and matte black finish offers a clear set of dimensions for planning cabinet layouts. When a project calls for a 4-1/2 inch length pull with 1-3/8 inch projection and a slim 5/8 inch width, this model defines those parameters up front. For cabinet runs where Domestic Bliss collection styling and a low-reflection matte black look are desired, this pull sets a consistent standard across doors and drawers.