Berenson Domestic Bliss Series 5-1/16" (128 mm) Center to Center Matte Black Pull, - 2401-1055-P

Berenson Domestic Bliss Pull For Cabinet Jobs

Berenson Domestic Bliss pull is a zinc cabinet handle in a matte black finish that gives cabinets a dark, uniform look for kitchens, baths, or built-ins. The pull is part of the Domestic Bliss collection, so it visually matches other pieces in the same line on a project. Its 5-1/16 inch (128 mm) center to center drilling lines up with common cabinet boring patterns, which streamlines layout when working across multiple doors and drawers. The overall length of 5-3/4 inches provides enough hand clearance along the front of the cabinet for a solid grip without dominating the face of the door or drawer. A projection of 1-3/8 inches sets the hand off the surface comfortably, which helps with frequent use on high-traffic cabinets. The 5/8 inch width and 3/4 inch base diameter keep the pull visually balanced while giving a defined footprint against the cabinet surface.

Key Domestic Bliss Pull Details That Matter

• The zinc material provides a solid metal pull body, which supports repeated everyday use on doors and drawers without the lightweight feel of non-metal options.
• The matte black finish delivers a low-sheen, dark appearance, which helps the pull blend with modern cabinet finishes or stand out against light-colored fronts.
• The 5-1/16 inch (128 mm) center to center dimension matches a common drilling size, which simplifies updating or aligning multiple pulls across a run of cabinets.
• The 5-3/4 inch overall length gives extra finger clearance along the handle, which makes it easier to grab, especially on taller pantry doors or wider drawer fronts.
• The 1-3/8 inch projection spaces the handle away from the cabinet face, which helps fingers wrap behind the pull comfortably without scraping against the surface.
• The 5/8 inch width and 3/4 inch base diameter create a defined contact area, which helps the pull sit squarely on the cabinet face for a clean, finished look.

Installation Dimensions For Berenson 2401-1055-P Pull

The 128 mm (5-1/16 inch) center to center drilling size sets the hole spacing for mounting the Berenson 2401-1055-P pull, which is important when laying out new cabinets or swapping hardware on existing doors. An overall length of 5-3/4 inches defines the visible span of the handle, which helps with planning spacing between adjacent pulls on drawer banks. The 1-3/8 inch projection controls how far the pull stands off the face, which affects both hand clearance and how far hardware extends into walkways. A 5/8 inch width keeps the grip slim while still readable on the front of the cabinet, which supports a clean line across a row of doors. The specified 8-32 x 1 inch screw size matches the threaded inserts on the pull, which guides the choice of mounting screws for typical cabinet door and drawer front thicknesses.

Using This Matte Black Pull In Cabinet Work

Where The 5-1/16 Inch Pull Fits Best

The 5-1/16 inch (128 mm) center to center measurement on this matte black cabinet pull fits layouts built around metric drilling, which is common in many cabinet lines and shop templates. The 5-3/4 inch overall length suits standard width doors and medium drawers, giving enough handle span without crowding narrow rails. A 1-3/8 inch projection works well on both face-frame and frameless cabinets, because it keeps the grip accessible while keeping hardware closer to the front plane of the cabinet. The 5/8 inch width and 3/4 inch base diameter provide a presence that is visible on painted, stained, or laminate fronts, which supports use across different cabinet materials in a single project. The matte black finish pairs with other dark fixtures and hinges, which helps keep a consistent hardware color story throughout a room.

Details That Support Consistent Cabinet Results

The defined 128 mm center to center drilling on the Berenson Domestic Bliss pull allows repeated hole locations, which helps installers keep lines of pulls straight on multi-door runs and drawer stacks. Using the 5-3/4 inch length as a constant size across a kitchen or bath keeps hardware proportions consistent, which is important when aligning handles on banks of drawers with varying widths. The 1-3/8 inch projection gives predictable clearance from the door or drawer surface, which helps avoid contact between fingers and the cabinet finish during use. The 5/8 inch width guides jig setup for drilling, because it shows how much of the pull will cover the front around the mounting holes. Zinc construction across the pull body provides a uniform feel from handle to handle, which supports a professional finish when the same Domestic Bliss model is used throughout the installation. The matte black finish across each piece keeps reflections low, which makes alignment of hardware easier to read under typical interior lighting.

Common Questions About This Domestic Bliss Pull

Selecting This Pull For Cabinet Projects

The Berenson Domestic Bliss pull with 128 mm center to center drilling, 5-3/4 inch overall length, and 1-3/8 inch projection offers defined measurements that align with common cabinet layouts. Its zinc construction and matte black finish give a consistent look across doors and drawers. The specified 5/8 inch width, 3/4 inch base diameter, and 8-32 x 1 inch screw size provide clear mounting and layout references. For projects needing a coordinated matte black cabinet pull from the Domestic Bliss collection, this model gives straightforward dimensions that support clean, repeatable installations.