Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Domestic Bliss pull gives you a 3-3/4 inch (96 mm) center to center handle that works well where consistent hole spacing is already laid out on cabinet doors or drawers. The zinc material provides a solid, predictable feel under load in day-to-day use. A slate finish adds a specific design option when pairing with hinges or other visible decorative hardware in the same space. The overall 4-1/2 inch length defines the visual footprint on each front, which matters when lining up multiple pulls across a run of cabinets. A 1-3/8 inch projection sets how far the pull stands off the face, affecting hand clearance during regular opening and closing. The 5/8 inch width shapes the grip surface so installers and users understand how it will feel in the hand once mounted on the cabinet.
The 3-3/4 inch (96 mm) center to center dimension sets both drilling and replacement work for this pull, because existing cabinets with that spacing can accept it without altering the hole pattern. A total length of 4-1/2 inches provides predictable coverage, so layout lines can be referenced from the pull ends when aligning across multiple fronts. The 1-3/8 inch projection governs stand-off from the face, which affects finger clearance against doors or drawer fronts. Width at 5/8 inch defines how the pull presents on narrow rails or stile faces, influencing where it can be positioned without crowding edges or profiles. Specified 8-32 x 1 inch screw size ties directly into the threaded interface, allowing straightforward through-bore mounting on standard cabinet material thicknesses.
This Domestic Bliss Series pull from Berenson Corporation is categorized as a handle and pull in decorative hardware, so it fits cabinet and casework applications where a defined pull style is needed. The slate finish gives a clear aesthetic direction for projects that call for a darker, muted tone on doors and drawers. With a 3-3/4 inch (96 mm) center to center layout, this pull aligns with many cabinet hardware drilling patterns used in kitchens, baths, and built-ins. The 4-1/2 inch overall length makes it suitable for standard-width drawer fronts and doors where an oversized handle is not required. Because projection is 1-3/8 inches, the pull provides space between the hand and the cabinet face, which supports repeated opening cycles in busy environments.
The 3-3/4 inch (96 mm) center to center measurement allows installers to rely on standard jigs, templates, or CNC programs, reducing layout time when repeating the same pull across many openings. A consistent 4-1/2 inch length means every pull aligns visually when measured from edges or panel centers, which cuts down on rework due to mismatched proportions. Width at 5/8 inch balances grip and sightline, giving a clear target for handling while staying scaled to typical residential and light commercial cabinetry. The 1-3/8 inch projection sets a uniform stand-off distance, so openings along a run feel the same to the hand, supporting a professional, even result. The specified screw size of 8-32 x 1 inch coordinates with common drilling through standard cabinet thickness, helping maintain consistent thread engagement across the project.
The Berenson Domestic Bliss pull has a 3-3/4 inch (96 mm) center to center dimension, which sets the hole spacing for new drilling and guides direct replacement on existing cabinets.
The pull measures 4-1/2 inches in overall length, defining how much of the cabinet front it covers and helping plan placement on narrower or wider fronts.
The 2404-1SLT-P pull is made from zinc, giving a uniform base material across all pulls on the job for consistent handling and appearance.
This Berenson cabinet handle uses a slate finish, providing a defined darker tone that coordinates with other slate decorative hardware on the project.
The pull has a 1-3/8 inch projection, which sets the stand-off distance from the cabinet face and affects finger clearance during everyday use.
This 96 mm center to center pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and helping align with standard through-bore installations.
The Berenson Domestic Bliss pull in slate ties together zinc construction, a 3-3/4 inch (96 mm) center to center layout, and a 4-1/2 inch overall length, giving installers a defined hardware choice for cabinets and casework. With its 1-3/8 inch projection and 5/8 inch width, the pull establishes a repeatable grip profile across doors and drawers. Specified 8-32 x 1 inch screw sizing aligns with standard cabinet drilling, supporting straightforward mounting on typical fronts. Use these verified dimensions and finish details to match this pull to your current project requirements and move directly into layout and install work.
