Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Domestic Bliss pull 128mm center to center gives you a cabinet handle sized for standard 128 mm drilling, so it drops into common layouts without changing boring patterns. The 5-1/16 inch center to center dimension sets consistent hand spacing across doors and drawers, which helps runs look straight on longer cabinet banks. Overall 5-3/4 inch length provides a little overhang past the screw points, so hands clear the cabinet face more easily when grabbing from the side. The 1-3/8 inch projection stands the pull off the surface far enough for a full finger grip, which is useful on heavier drawers. A 5/8 inch width keeps the profile slim, so it works where space between fronts is tight. The 3/4 inch base diameter gives each end a defined footprint, which helps visually align multiple pulls on a project. Zinc material provides a solid-feeling handle body.
The 5-1/16 inch (128 mm) center to center spacing matches a common two-hole pattern, which suits setups already drilled for 128 mm hardware. Screw size 8-32 x 1 inch is specified, which pairs with many cabinet door and drawer front thicknesses found in typical installations. The 1-3/8 inch projection defines how far the pull sits off the face, which affects how deep hands reach behind the handle on thicker fronts. A 5/8 inch width concentrates the load across a moderate band, which can matter when mounting onto narrower rails. The 3/4 inch base diameter at each end marks out the contact area against the surface, which helps position the pull evenly relative to panel edges and reveals. Zinc construction provides a unified solid pull body for mounting to cabinet faces.
The Berenson Domestic Bliss Series 5-1/16 inch (128 mm) center to center slate pull is positioned for cabinet and drawer applications where 128 mm spacing is already planned. The 5-3/4 inch overall length suits doors and medium-width drawers, giving enough bar to grab without overpowering the front. A 1-3/8 inch projection places the pull away from the face, which helps on fronts where users approach from above or the side, such as base cabinets. The 5/8 inch width keeps the hardware slim, which can be useful on narrower drawer fronts or smaller doors in a bank. The slate finish on the zinc pull offers a darker tone, which can be used to coordinate with other slate-finished pieces in the space. The Domestic Bliss collection name ties this pull into Berenson Decorative Hardware & Moldings handles and pulls options, giving a defined style reference within Berenson product lines.
The defined 5-1/16 inch (128 mm) center to center measurement provides a fixed drilling distance, which helps installers repeat hole locations accurately across multiple doors and drawers. A 3/4 inch base diameter at each end creates a clear visual circle around the mounting area, which makes it easier to position the pull relative to stile edges or mid-rails. The 1-3/8 inch projection remains consistent from front to front, which keeps hardware standing off the surface by the same distance throughout a run. A 5/8 inch width keeps each pull visually balanced on mid-size drawers, supporting even sight lines when several are stacked vertically. The zinc material gives a consistent body through the length of the pull, which contributes to uniform feel when multiple pieces from the Domestic Bliss line are installed. The slate finish applies across the pull surface, which keeps the appearance even from base to grip area along the handle.
The Domestic Bliss pull has a 5-1/16 inch (128 mm) center to center measurement, which matches a common cabinet drilling pattern for handles and pulls.
The 2405-1SLT-P pull has a 5-3/4 inch overall length, which provides extra gripping area beyond the screw centers on cabinet doors and drawers.
The Berenson Domestic Bliss pull projects 1-3/8 inch from the cabinet surface, giving room for fingers behind the handle when opening doors and drawers.
The cabinet pull is made from zinc with a slate finish, combining a solid metal body with a darker toned surface for design coordination.
The handle uses 8-32 x 1 inch screws, which match threaded holes in the pull and work with many typical cabinet door and drawer front thicknesses.
This slate pull is from the Berenson Domestic Bliss collection by Berenson Corporation, aligning with other Domestic Bliss decorative handles and pulls.
The Berenson Domestic Bliss Series 5-1/16 inch (128 mm) center to center slate pull provides defined dimensions, from its 5-3/4 inch length to 1-3/8 inch projection and 5/8 inch width, which supports consistent layout across cabinets. Zinc construction with a slate finish and a 3/4 inch base diameter at each end ties appearance and contact points together across a run of doors and drawers. For projects built around 128 mm spacing within the Domestic Bliss family, this 2405-1SLT-P pull from Wurth Baer Supply offers a clearly specified option ready to match that layout.
