Berenson Domestic Bliss Series 6-5/16" (160 mm) Center to Center Slate Pull, - 2406-1SLT-P
Description
Domestic Bliss Pull 160mm Slate For Cabinets
Domestic Bliss pull 160mm slate is a Berenson Domestic Bliss Series cabinet pull designed for projects that call for a 6-5/16 inch (160 mm) center to center layout. This fixed drilling dimension sets handle spacing precisely, which helps maintain consistent alignment across doors and drawers on a run. The pull is made from zinc, so it provides a solid metal feel that suits everyday cabinet use. Its slate finish gives a darker, neutral look that works when coordinating with modern fronts or contrasting lighter surfaces. At 7-1/2 inches overall length, the pull spans wider face frames or drawer fronts comfortably, which supports a full-hand grip. As part of the Domestic Bliss collection from Berenson Corporation, it keeps styling and sizing consistent when used with other pulls from the same family on a job.
Key Details That Shape Cabinet Handle Performance
- The 6-5/16 inch (160 mm) center to center dimension sets exact hole spacing, which simplifies layout on new cabinet drilling and helps when upgrading from pulls with the same spec.
- The 7-1/2 inch overall length gives extended bar coverage, which can look balanced on medium to wider fronts and offers more contact area for opening heavier drawers.
- The 1-7/16 inch projection defines how far the pull stands off the cabinet face, which creates working clearance for fingers without pulling the handle too far into the room.
- The 3/4 inch width across the pull provides a stable gripping surface, which helps users get a firm hold when pulling against loaded drawer slides or tight door seals.
- The 7/8 inch base diameter sets the footprint at each contact point, which can cover minor previous marks around old drill holes in many retrofits.
Installation Geometry Of This Berenson Cabinet Pull
This Berenson Domestic Bliss cabinet pull uses a 6-5/16 inch (160 mm) center to center drilling pattern, which establishes the distance between mounting points during layout. The pull is designed around 8-32 thread screws, which is a common cabinet hardware thread, so it matches typical cabinet door and drawer construction that accepts that size. The 1-7/16 inch projection defines the stand-off from the door or drawer face, which influences how fingers clear door styles or overlay edges during use. With a 3/4 inch width and 7/8 inch base diameter, the handle presents a defined footprint on the surface, which can influence drilling placement relative to panel edges and rails. The 7-1/2 inch overall length informs positioning on drawer fronts so the handle remains centered while respecting clearances to adjacent hardware.
Using The Berenson Domestic Bliss Pull In Projects
Where This Domestic Bliss Cabinet Pull Fits Best
The Domestic Bliss pull 160mm slate belongs to Berenson Corporation's Domestic Bliss collection, which groups handles with a coordinated look. Its 6-5/16 inch (160 mm) center to center spec fits layouts that call for a mid-length pull, so it aligns well with standard cabinet door sizes and common drawer front widths. The slate finish offers a subdued, neutral tone, which suits projects that favor darker decorative hardware and modern design lines. Because the pull measures 7-1/2 inches overall, it works well on kitchen and bath cabinets where a longer handle can span more of the rail or stile, helping the hardware visually match larger fronts. The zinc construction supports use on frequently operated cabinets in spaces such as kitchens, bathrooms, and utility areas that are part of everyday routines.
Details That Support Repeatable Cabinet Handle Results
The 6-5/16 inch (160 mm) center to center measurement on this Berenson Domestic Bliss handle provides a fixed drilling reference, which aids in repeating hole locations across multiple doors and drawers and helps reduce layout variation. Its 7-1/2 inch length makes it easier to keep handles visually centered on fronts while respecting stiles, rails, and edge distances, which supports consistent sight lines along a bank of cabinets. The 1-7/16 inch projection creates a stable gap behind the pull, allowing fingers to wrap behind the bar without contacting the door face, which can reduce wear on finished surfaces over time. A 3/4 inch width offers a defined gripping bar that feels substantial in the hand, which supports controlled opening of heavier or fully loaded drawers. The 7/8 inch base diameter creates a clear anchoring point at each end, which can help cover many prior drill margins when replacing pulls with a similar spread.
Common Questions About The Domestic Bliss 160mm Pull
What is the center to center size of this pull?
The Berenson Domestic Bliss 2406-1SLT-P pull has a 6-5/16 inch (160 mm) center to center dimension, which sets the hole spacing used when drilling or matching existing cabinet handle locations.
How long is the Berenson Domestic Bliss 2406-1SLT-P?
The Domestic Bliss pull 160mm slate has a 7-1/2 inch overall length, which suits medium to wider cabinet doors and drawer fronts where a longer handle span is preferred.
What material and finish does this cabinet pull use?
The Berenson Domestic Bliss pull is made of zinc with a slate finish, which provides a solid metal feel and a darker, neutral appearance for cabinets and casework.
How far does this Domestic Bliss pull project from the cabinet?
The 2406-1SLT-P pull has a 1-7/16 inch projection, creating working clearance behind the handle for fingers while keeping the hardware close to the cabinet face.
What screw specification does this Berenson pull use?
The Domestic Bliss Series 2406-1SLT-P pull uses 8-32 screws, which matches a common cabinet hardware thread for mounting into standard cabinet doors and drawer fronts.
What are the width and base diameter of this pull?
The Berenson Domestic Bliss pull has a 3/4 inch width and a 7/8 inch base diameter, which define its grip surface and contact footprint on the cabinet front.
Select This Slate Pull For 160mm Cabinet Layouts
The Domestic Bliss pull 160mm slate from Berenson Corporation combines a 6-5/16 inch (160 mm) center to center drilling pattern with a 7-1/2 inch length, a 1-7/16 inch projection, and a slate-finished zinc body. These dimensions and material details support layout, grip, and appearance on cabinet doors and drawers that match this geometry. For projects built around the Domestic Bliss collection and 160 mm drilling, this pull provides a consistent hardware choice for professional and serious DIY cabinet work.