Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Channing pull is a contemporary zinc bar pull from the Barrington collection, mounting on 5-1/16 inch (128 mm) centers for cabinet doors and drawer fronts.
The 5-1/16 inch center-to-center is a standard spacing that appears on a wide range of factory-drilled domestic cabinetry, semi-custom lines, and flatpack installations. A buyer replacing existing hardware at that spacing drills nothing and simply swaps the pull through the existing holes. At 6-3/8 inches overall, the Channing pull has enough visual length to register on a mid-width drawer or an upper door without overrunning a narrow front. It is a natural fit for base cabinet drawers in the 15 to 21 inch range and for standard upper door pulls where the hardware should be seen but not dominant.
Sable is a dark finish in the Barrington palette, closer to a deep charcoal-black than a flat matte black. The low-sheen surface diffuses light along the bar rather than reflecting it, which means the pull holds its color in kitchen lighting instead of reading as a bright spot on the door face. It holds strong contrast against white, cream, and light gray fronts, and softens into the door on darker or wood-toned cabinetry. The bar is cast in zinc, the dominant construction material across this segment, and the finish is factory-applied by Top Knobs to the Barrington collection standard.
Cabinet shops running a Barrington hardware program often reach for this spacing when the project calls for a mid-sized pull across a uniform drawer bank. The 128 mm center-to-center is the number specifiers and contractors know by memory, and the Sable finish is the dark option in the Barrington line for projects where the hardware palette runs warm-dark rather than black-matte or bright. Designers assembling a contemporary kitchen with Barrington knobs on doors will find the Channing pull in this finish and spacing is the ready companion for the drawer fronts. Homeowners replacing builder-grade hardware drilled to this spacing get a direct swap without picking up a drill.
Sable is a dark finish with a warmer undertone than a flat matte black. The two are distinct Barrington collection finishes and are not interchangeable.
Yes. 5-1/16 inches converts to approximately 128 mm, and the two values refer to the same hole spacing on this pull.
Yes. The Barrington collection includes matching knobs in the same Sable finish, which is the standard way to run pulls on drawers and knobs on doors within one hardware program.
At 1 inch (25 mm) from the door face to the back of the bar, this is a close-profile pull. It works well on tight drawer banks where clearance between an open drawer and an adjacent cabinet matters.
When the holes are at 128 mm and the finish palette calls for something darker than chrome and warmer than flat black, the Channing pull in Sable is the Barrington answer.
Sold In: 1 Each