PRO LUXE Bistro Series 160mm pull is a satin nickel handle from the Bistro Collection that provides a consistent look for cabinet and drawer fronts across a run of work. The zinc material construction creates a solid-feeling pull that stands up to everyday cabinet use in kitchens, baths, or shop-built casework. A 160 mm center to center mounting pattern aligns with common drill fixtures, supporting repeatable boring on multiple fronts. The overall 7-1/2 inch length spans wider drawer fronts cleanly, giving good hand clearance when opening heavier drawers. A 1-1/16 inch projection keeps hands away from the face of the cabinet, which helps reduce contact marks on finished fronts. The 7/8 inch width gives enough gripping surface for comfortable use while still fitting narrow rails and stiles. The satin nickel finish delivers a muted metallic look that coordinates with many hinge and appliance finishes on the same job.
The 160 mm center to center measurement defines the hole spacing for this PRO LUXE Bistro Series pull, so it lines up with metric-based boring patterns commonly used in cabinet shops. The 7-1/2 inch overall length gives room to position the pull on wider rails without crowding door edges. A 1-1/16 inch projection establishes the standoff from the cabinet face, allowing clear finger space while still keeping the handle close to the door for a tight profile. The 7/8 inch width fits comfortably on standard 1-1/2 to 2-1/2 inch rails, helping maintain adequate reveal around the pull. The satin nickel finish on zinc offers a smooth feel at the hand grip, which supports repeated use on high-traffic doors and drawers in residential or commercial cabinetry.
This PRO LUXE SERIES Bistro pull, with its 160 mm center to center mounting, fits well on cabinet doors and drawers laid out with metric drilling systems, which is common in many shop-built kitchen and bath projects. The 7-1/2 inch overall length makes it suitable for mid-size to larger drawers where a longer handle gives better leverage. Its 1-1/16 inch projection keeps hands comfortably away from the face, which is useful on deeper overlay doors where clearance is tight. The 7/8 inch width lets the pull sit neatly on narrower stiles without overpowering the rail, making it a practical choice for both wall and base cabinets. The satin nickel finish works across a range of decorative hardware and moldings, aligning with other satin nickel components that may be specified on the same job.
The clearly defined 160 mm center to center spacing on the P2156-SN cabinet pull supports consistent hole boring, which helps installers line up rows of doors and drawers with precise alignment. The 7-1/2 inch overall length gives a predictable layout reference from edge to edge, aiding template positioning on both left- and right-handed doors. A projection of 1-1/16 inch sets a uniform distance off the cabinet face, which helps finished kitchens look even when multiple pulls are viewed in a line. The 7/8 inch width offers a standard gripping profile, so users experience the same feel across every cabinet where this pull is used. The zinc construction with satin nickel finish maintains a similar appearance and hand feel across the Bistro Collection, which simplifies hardware selection when a project calls for matching decorative handles and pulls throughout.
This PRO LUXE Bistro Series 160mm pull has a 160 mm center to center dimension, which sets the drilling distance between mounting holes for cabinet doors and drawers.
The pull has a 7-1/2 inch overall length, 1-1/16 inch projection, and 7/8 inch width, which define how much space it occupies on the cabinet face and how far it stands off.
The PRO LUXE Bistro Series 160mm pull is made from zinc, which provides a solid casting base for the satin nickel finish and a consistent feel in hand.
The SZ10SN pull has a satin nickel finish, which offers a muted metallic appearance that coordinates with many satin nickel hinges and fixtures.
The PRO LUXE Bistro Series 160mm pull uses 8-32 x 1 inch screws, which match the threaded mounting holes in the zinc pull body for secure attachment.
This pull is part of the Bistro Collection, which allows designers to coordinate this 160 mm center to center handle with other Bistro decorative hardware on the same project.
The PRO LUXE Bistro Series 160mm pull from Wurth Baer Supply combines zinc construction, satin nickel finish, and 160 mm center to center mounting to support consistent cabinet hardware layouts. Its 7-1/2 inch length, 1-1/16 inch projection, and 7/8 inch width give a practical profile for doors and drawers in many residential or commercial projects. Selecting this P2156-SN cabinet pull lets installers and builders keep a unified Bistro Collection look across decorative hardware and moldings on their next run of cabinets.
Sold In: 1 Each