PRO LUXE Bistro Series 3 inch pull is a zinc cabinet handle in a vintage bronze finish designed for decorative hardware applications. The 3 inch center to center dimension positions the mounting holes at a common cabinet drilling pattern, which simplifies layout on doors and drawers. The overall length of 3-7/8 inches gives the pull enough grip area for fingers while still fitting small to medium faces. Its 1-1/16 inch projection sets the handle away from the cabinet surface so fingers clear the door edge during use. The 11/16 inch width provides a comfortable contact surface, which helps everyday opening feel controlled rather than sharp or cramped. The vintage bronze finish delivers a dark, traditional look, which supports bistro-style or classic kitchen designs. As part of the Bistro collection, this pull keeps a consistent style when used across multiple fronts.
The 3 inch center to center measurement defines the drilling layout, so hole placement aligns directly with this pull's mounting points on cabinet doors and drawers. The overall length of 3-7/8 inches means the pull extends slightly beyond the hole spread at both ends, which covers the bore area and frames the grip visually. A 1-1/16 inch projection keeps space between the pull and cabinet surface, allowing fingers to wrap behind the bar without rubbing the finish. With an 11/16 inch width, the handle presents a narrow but distinct profile, which lets it sit neatly on face frames or slab fronts. The zinc construction adds mass to the pull, giving it a firm, metal feel each time a drawer or door is opened.
This pull belongs to the Bistro collection, so its style is suited to cabinetry where a coordinated handle look is planned across multiple fronts. The vintage bronze finish supports projects that lean toward warm, traditional, or bistro-inspired themes, such as kitchens, bars, or similar casework using decorative hardware. The 3 inch center to center dimension fits layouts built around that common spacing, which is often used on smaller cabinet doors, drawer fronts, and utility cabinets. The 3-7/8 inch overall length helps this pull sit proportionally on narrower rails or drawer fronts, where longer pulls might crowd edges or adjacent fronts. With a 1-1/16 inch projection and 11/16 inch width, the pull suits installations where a low-profile but functional grip is needed.
The 3 inch center to center specification provides a consistent drilling reference, which helps jigs or drilling templates hit the same spacing from cabinet to cabinet. The 8-32 x 1 inch screw size aligns with standard cabinet hardware threading, which keeps fastener selection straightforward when working through a shop or jobsite installation. The zinc material forms a solid base under the vintage bronze finish, which supports a uniform appearance across multiple pulls from the same collection. The 1-1/16 inch projection defines the standoff from the door or drawer face, which helps maintain even finger clearance across all fronts in a run. At 11/16 inch width, each pull occupies a predictable amount of face space, which aids in planning handle placement away from panel edges or neighboring hardware. The Bistro collection designation ties this pull to a known style family, which supports consistent design when specifying hardware for an entire room or multi-cabinet build.
The pull has 3 inch center to center spacing, a 3-7/8 inch overall length, 1-1/16 inch projection, and 11/16 inch width, which together define its drilling layout and hand clearance.
The 3 inch center to center spacing matches a common cabinet drilling pattern, which supports straightforward replacement or new layouts using standard jigs and templates.
The pull is made from zinc with a vintage bronze finish, which provides a solid metal feel with a darker, traditional appearance on cabinet fronts.
The 1-1-16 inch projection spaces the grip off the cabinet face, which helps fingers clear the door or drawer edge when opening and closing.
The pull is specified with 8-32 x 1 inch screws, which matches a common cabinet hardware thread for securing the handle through typical door and drawer thicknesses.
The Bistro collection in vintage bronze supports bistro-style and traditional cabinet designs, which favor warm tones and classic decorative hardware lines.
This PRO LUXE Bistro Series 3 inch pull combines a 3 inch center to center layout, zinc construction, and vintage bronze finish to support decorative cabinet work. The defined dimensions of 3-7/8 inch length, 1-1/16 inch projection, and 11/16 inch width give clear sizing for doors and drawers. The specified 8-32 x 1 inch screw size matches a standard cabinet hardware thread, which fits typical drilling practices in shops and on jobsites. For cabinetry that calls for a coordinated Bistro collection look in vintage bronze, this handle offers a consistent style and familiar drilling pattern.
Sold In: 1 Each