PRO LUXE Summit Series 3 Inch Cup Pull Use

PRO LUXE Summit Series 3 inch cup pull describes a satin nickel cup pull from the Bistro collection that is designed as decorative cabinet hardware, so it serves as both a grip point and a visible style element on doors or drawers. The zinc material described in the web description forms the body of the pull, which creates a solid metal handle that supports repeated opening and closing motions in typical cabinet use. The satin nickel finish specified for this pull gives the surface a muted metallic look, which presents a consistent appearance across a run of cabinets. The center to center measurements of 3 inches (76 mm) and 3-3/4 inches (96 mm) provide two drilling patterns in one pull, which allows the same part to align with either of those hole spacings on cabinet fronts. The overall length of 4-5/8 inches from the description extends beyond the hole spacing, which provides finger clearance across the front edge during normal operation.

Key Bistro Satin Nickel Cup Pull Details

• The web description lists the collection as Bistro, which groups this pull with other matching decorative pieces, so a project can keep a consistent design language when selecting related hardware.
• The material is specified as zinc, which creates a cast metal pull body that handles direct hand contact in daily cabinet use without the flex seen in non-metal parts.
• The finish is satin nickel, which provides a soft metallic sheen that reduces sharp reflections, helping this pull visually coordinate with other satin nickel hardware in the same space.
• The projection is listed as 1-1/2 inches, which sets how far the pull stands off the door or drawer face, giving fingers enough room to grip the cup edge during opening.
• The width of 1-1/4 inches describes the front-to-back dimension across the cup, which affects how the pull covers the mounting area and contributes to the visible scale on the cabinet surface.
• The SAP description confirms the satin nickel finish and pull identity, which ties this part number directly to the described size and finish for repeat ordering on multi-unit jobs.

Center To Center Mounting And Fit Details

The stated center to center options of 3 inches (76 mm) and 3-3/4 inches (96 mm) give this pull flexibility to match existing drilling on cabinet doors or drawers that use either common spacing. The 4-5/8 inch length interacts with those center to center dimensions by extending beyond the holes, which helps the cup shape cover the drilled area and create a finished edge around the mounting points. The 1-1/2 inch projection spaces the gripping surface away from the cabinet face, which supports a comfortable hand position when pulling the drawer or door open. The width of 1-1/4 inches defines how much vertical face area the pull occupies, which influences how it sits relative to stiles and rails on framed or frameless cabinet fronts.

Using This Bistro Satin Nickel Cup Pull In Projects

Where This Zinc Cup Pull Works Best

The category listing as decorative hardware and handles and pulls positions this Bistro cup pull for cabinet and furniture applications where both function and appearance need attention. The satin nickel finish suits layouts that already use satin nickel hinges or other pulls, so the handle reads as part of a coordinated hardware set. The 3 inch (76 mm) and 3-3/4 inch (96 mm) center to center dimensions line up with common cabinet drilling patterns, so this pull can serve in layouts that mix existing cabinets and new work sharing those hole spacings. The combination of 4-5/8 inch length and 1-1/4 inch width allows the cup pull to span wider drawer rail sections, which visually anchors the hardware across the front.

Details That Support Consistent Cabinet Results

The SAP description P2144-SN, PULL, 3"/96MM C/C, STN NKL FIN defines both the size range and satin nickel finish, which helps shops repeat the same pull across multiple projects without size variance. The manufacturer part number SZ4SN connects this specific Summit Series satin nickel version to ordering systems, which streamlines reorders when expanding a job or matching existing hardware. The projection of 1-1/2 inches and width of 1-1/4 inches set predictable clearances, which helps layout decisions around adjacent drawers, doors, and neighboring pulls. The material specification of zinc provides a uniform base for the satin nickel finish, which keeps the appearance consistent from pull to pull in a long run of cabinets. The presence of both 3 inch (76 mm) and 3-3/4 inch (96 mm) center to center options in a single product description means a project can rely on these measurements when planning drilling jigs or CNC programs for front preparation.

Common Questions About This Satin Nickel Pull

Select This Satin Nickel Cup Pull For Your Layout

The combination of Bistro collection styling, zinc construction, and satin nickel finish defines this PRO LUXE Summit Series cup pull as a focused cabinet hardware choice. The 3 inch (76 mm) and 3-3/4 inch (96 mm) center to center options, along with the 4-5/8 inch length, 1-1/2 inch projection, and 1-1/4 inch width, give clear sizing for layout planning. The specific identifiers P2144-SN and SZ4SN tie every order to the same satin nickel cabinet pull, supporting consistent hardware appearance across installations.