Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO LUXE carbonite series black iron knob gives cabinets and furniture a rugged, hand-worked look, so it suits projects where a delicate pull would look out of place. The knob belongs to the Vintage collection, which helps tie in other matching decorative hardware on the same job. Its black iron finish creates a dark, textured appearance that visually grounds face frames and doors against both light and dark surfaces. The knob measures 1-1/4 inch long by 1-1/4 inch wide, forming a square profile that reads clean and straightforward on drawers or doors. A projection of 1-1/8 inch brings the grip slightly off the surface, providing finger clearance while keeping the hardware tight to the face. The knob is made from zinc, giving a solid-feeling pull that supports everyday opening and closing without adding excessive weight to the door or drawer front.
The 1-1/4 inch square face of this knob suits standard cabinet door and drawer front proportions, so it drops into most layouts without unusual spacing changes. Its base size of 1/2 inch by 1/2 inch focuses contact at the mounting hole, which helps the knob sit neatly centered over a drilled point. The specified 8-32 x 1 inch screw size matches a common cabinet knob thread, so installers working with typical door and drawer thicknesses can align this knob with existing boring patterns that use the same thread standard. The 1-1/8 inch projection defines how far the hand sits off the surface, providing a predictable feel across a kitchen or bath when multiples are installed in a grid.
This knob is identified as a decorative hardware knob in the PRO LUXE Carbonite Series, so it fits cabinet and furniture applications where appearance matters as much as function. Its rough-hewn, hand-worked look suits rugged jobs, as stated in the description, such as rustic kitchens, shop-style storage, or heavier-looking built-ins. The square 1-1/4 inch by 1-1/4 inch dimensions present enough surface area to look proportionate on full-height doors as well as wider drawers. The black iron finish from the Vintage collection helps tie together other black-finished hinges or pulls specified on the same run of cabinetry, giving a consistent visual language from one opening to the next.
The knob uses a standard 8-32 screw size at 1 inch length, which aligns with a widely used cabinet knob mounting thread and supports straightforward replacement or new installation in panels pre-bored for that thread. The defined 1-1/4 inch square face allows installers to set precise centerline measurements when laying out multiple knobs across doors and drawers, reducing layout variation from piece to piece. Its 1-1/8 inch projection keeps each gripping point at a known offset from the cabinet face, which helps when designing for clear hand access near adjacent walls, appliances, or tall cabinet sides. The 1/2 inch by 1/2 inch base keeps the contact area compact, so the knob visually centers the force directly over the fastener location on the door or drawer front.
The PRO LUXE carbonite series black iron knob measures 1-1/4 inch in length and 1-1/4 inch in width, giving it a square face that suits standard cabinet door and drawer proportions.
The knob has a 1-1/8 inch projection, setting the gripping surface slightly off the cabinet face for finger clearance while keeping the pull relatively low profile.
The knob is made from zinc with a black iron finish, creating a sturdy body with a dark, rough-hewn appearance that matches the Vintage collection style.
The knob uses an 8-32 x 1 inch screw size, matching a common cabinet hardware thread standard for mounting on typical doors and drawers.
The base of the knob measures 1/2 inch in length and 1/2 inch in width, creating a compact contact area centered over the mounting hole.
The Vintage collection black iron finish gives the knob a rough-hewn, hand-worked look that suits rugged, rustic, or industrial-style cabinet and furniture projects.
This PRO LUXE Carbonite Series black iron 1-1/4 inch square knob pairs zinc construction, a Vintage collection black iron finish, and a 1-1/8 inch projection to serve active cabinet doors and drawers. The defined 8-32 x 1 inch screw specification and compact 1/2 inch square base support straightforward planning on new builds or upgrades that call for a rugged, square-profile knob.