PRO LUXE PRO Luxe Series Brushed Golden Brass Cup Pull is a zinc cabinet pull from the Terrace collection that adds a soft, curved silhouette to doors and drawers, so it supports projects needing a decorative yet functional grip point. The Terrace collection design brings feminine curves and subtle details to the cabinets it adorns, which lets installers coordinate with transitional and traditional homes seeking a contemporary touch on face frames or frameless boxes. Its brushed golden brass finish provides a warm metallic look that visually elevates cabinet runs, which helps differentiate kitchens, baths, or built-ins from standard chrome or stainless hardware layouts. The cup pull format gives a recessed underside for fingers, so frequent opening and closing of drawers feels controlled and consistent across the bank. As part of decorative hardware and moldings in the handles and pulls class, this pull serves as the main contact point on cabinet fronts, which keeps daily use focused on a durable, replaceable component.
The pull length of 5 inches sets the overall footprint on the cabinet face, which helps installers plan spacing relative to door edges, drawer fronts, and neighboring hardware. A projection of 1-1/16 inches defines how far the cup stands off the surface, so fingers have room to grab while fronts stay reasonably low profile in tight galley spaces. The width of 1-7/8 inches shapes the vertical coverage on the stile or drawer rail, which affects how the pull aligns visually with rail heights or narrow frames. Center to center options of 3 inches, or 76 mm, and 3-3/4 inches, or 96 mm, provide two mounting patterns in one piece, which lets installers match existing hole spreads on replacement jobs or follow common drilling jigs on new cabinet layouts. The 8-32 x 1 inch screw size matches a standard machine thread for cabinet mounting, which supports straightforward fastening through typical drawer and door thicknesses.
The Terrace collection description notes that its unique silhouette brings feminine curves and subtle details to the cabinets it adorns, which aligns well with transitional and traditional homes that still want a contemporary touch on hardware lines. Because the pull sits in the decorative hardware and moldings category under handles and pulls, it is suited to finished cabinet doors and drawers in kitchens, bathrooms, and furniture-style storage rather than utility boxes. The brushed golden brass finish gives a warmer tone than polished brass, which helps it integrate with painted cabinets, stained woods, and mixed-metal schemes that favor softer reflections. With an overall length of 5 inches, the pull proportion works across standard drawer widths and door rails, so installers can use one model to maintain visual continuity from small vanity drawers up through larger kitchen drawer banks.
The dual center to center dimensions of 3 inches, or 76 mm, and 3-3/4 inches, or 96 mm, let the same pull address two common drilling patterns, which simplifies layout on new projects and aids direct swaps on many existing fronts. This 3 inch 96 mm center to center cup pull flexibility reduces the need to change drilling jigs mid-run, which helps maintain straight lines and repeatable spacing across an entire kitchen or bath. The projection of 1-1/16 inches offers enough clearance for a full hand grip, which can make heavier drawer boxes feel easier to open without crowding walkways. A width of 1-7/8 inches balances coverage on the rail without overpowering narrow fronts, which supports consistent sightlines when cabinets vary in size. The zinc material creates a unified body for the cup shape, which gives the installer a single rigid piece to align, tighten, and orient so each pull sits level along the run.
The PRO LUXE Terrace cup pull uses zinc material, which provides a solid, uniform body for the cup shape and supports a consistent feel across every cabinet door and drawer using this part.
The cup pull has a brushed golden brass finish, which delivers a warm, muted metallic look that works well on transitional and traditional cabinet designs needing a contemporary touch.
The pull offers center to center options of 3 inches, or 76 mm, and 3-3/4 inches, or 96 mm, which lets it match two common drilling patterns on cabinet doors and drawers.
The PRO LUXE brushed golden brass cup pull has a length of 5 inches, which sets its footprint across the cabinet face for planning spacing and alignment along rails and drawer fronts.
The cabinet cup pull projects 1-1/16 inches from the surface, which gives enough finger clearance for a secure grip while maintaining a relatively low profile on the cabinet front.
The Terrace cup pull uses 8-32 x 1 inch screws, which matches a standard cabinet hardware thread commonly used to fasten pulls through typical door and drawer thicknesses.
The PRO LUXE PRO Luxe Series Brushed Golden Brass Cup Pull combines zinc construction, a Terrace collection curved silhouette, and a brushed golden brass finish, so it aligns cabinets around a single style and color story. With 3 inch, or 76 mm, and 3-3/4 inch, or 96 mm, center to center options in one 5 inch body, the pull supports both new layouts and straightforward replacement where existing holes follow these patterns. The 1-1/16 inch projection and 1-7/8 inch width define a balanced grip profile, which keeps daily operation comfortable on drawers and doors. For projects where cabinet hardware acts as a key visual element, this brushed golden brass cup pull provides a defined, repeatable choice.
Sold In: 1 Each