PRO LUXE PRO Luxe Series Chrome Cup Pull is a Terrace collection cabinet pull that gives cabinets a defined cup profile, so hands find a consistent grip point during everyday use. The Terrace collection silhouette brings feminine curves and subtle details to the face of cabinet doors or drawers, which helps soften straight cabinet lines while keeping a controlled, repeatable look across a run. The soft shape is suited to transitional and traditional homes looking for a contemporary touch, so installers can match mixed-style interiors without changing hardware families. The chrome finish presents a bright, reflective surface that visually ties in with other chrome elements, helping maintain a coordinated appearance around sinks, appliances, or bath fittings. As a cup pull, the design shields the mounting area from direct contact, which helps keep finger impacts away from the cabinet surface during repeated opening and closing.
The center-to-center measurement of 3 inch (76 mm) and 3-3/4 inch (96 mm) on this PRO Luxe Series cup pull defines two mounting hole patterns, so the same part can follow either spacing where cabinets are pre-drilled or laid out on site. The length of 5 inch means the pull extends beyond both mounting points, which helps cover previous hole marks when shifting from smaller pulls using the same spacing. A projection of 1-1/16 inch holds the gripping edge away from the cabinet face, so fingers can pull straight outward without scraping the door or drawer. The width of 1-7/8 inch sets the vertical space the cup occupies, which helps maintain consistent reveals between stacked drawers when repeated across a bank.
The PRO LUXE PRO Luxe Series Chrome Cup Pull in the Terrace collection sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it suits cabinet and furniture applications that use surface-mounted pulls. The defined cup profile works on both doors and drawers where a recessed grab is preferred, which can help control the look of kitchen, bath, or built-in storage fronts. The chrome finish ties into interiors using chrome plumbing or appliance trim, so the pull can visually bridge cabinetry with other hard surfaces in the room. With a length of 5 inch and a width of 1-7/8 inch, the pull scales well on standard cabinet widths, giving enough metal presence to read clearly without overpowering face frames or slab fronts. The dual center-to-center measurements of 3 inch (76 mm) and 3-3/4 inch (96 mm) align with two widely used drilling layouts, which lets this single part number address different cabinet lines using either spacing.
The SZ134CH manufacturer part number and H077872CH description identify this specific Terrace collection chrome cup pull, so repeat orders can match existing installations without re-selecting hardware. The zinc material gives the pull a consistent base metal, which supports uniform weight and feel when dozens of pulls are used across a large kitchen. The chrome finish covers the zinc body as a single surface, so installers see uniform color and reflectivity when pulls are aligned along upper and lower runs. The projection of 1-1/16 inch establishes a repeatable stand-off, which helps doors and drawers operate without hand interference against adjacent fronts. The center-to-center options of 3 inch (76 mm) and 3-3/4 inch (96 mm) provide two fixed drilling patterns, allowing jigs or templates to be used across multiple cabinets for faster layout. The 5 inch length spanning those centers helps keep each pull visually centered on typical drawer fronts, which supports straight sight lines when inspected from across the room.
The PRO LUXE PRO Luxe Series Chrome Cup Pull uses 3 inch (76 mm) and 3-3/4 inch (96 mm) center-to-center spacing, so it can match either of these common drilling patterns on cabinet fronts.
The cup pull has a 5 inch overall length, 1-1/16 inch projection, and 1-7/8 inch width, which defines the visible footprint and hand clearance on cabinet doors or drawers.
The Terrace collection cup pull is made from zinc with a chrome finish, giving a metal body with a bright, reflective surface that visually coordinates with other chrome hardware.
The unique Terrace silhouette brings feminine curves and subtle details, which adds a soft, contemporary touch to transitional and traditional cabinet fronts.
The cup pull shape creates a recessed grab point, guiding the hand to a consistent location and helping protect the cabinet surface from direct finger impact during use.
This Terrace chrome cup pull is identified by manufacturer part number SZ134CH and SAP description H077872CH, which supports accurate reorders for matching hardware.
The PRO LUXE PRO Luxe Series Chrome Cup Pull pairs Terrace collection styling with defined dimensions, giving installers a clear cabinet hardware choice when a chrome cup profile is needed. With zinc construction, chrome finish, and 5 inch length, it presents a consistent look across multiple fronts. The dual 3 inch (76 mm) and 3-3/4 inch (96 mm) center-to-center spacing covers two common drilling layouts, which can streamline cabinet hardware planning on new work or updates. For projects calling for a cup pull that supports transitional or traditional cabinets with a contemporary touch, this SZ134CH Terrace pull offers a focused, repeatable option.
Sold In: 1 Each