Formica 8591-58 Flax White Laminate, 48"x96" Matte Finish is a Grade C9 cabinet liner designed as a non decorative surface for light duty interior use. The Grade C9 rating identifies it as a cabinet liner used for balancing and moisture control of laminate panels, which helps stabilize panels behind decorative faces in everyday shop work. Its .020" thickness provides a thin surfacing layer that adds moisture control and balance without adding significant bulk to assemblies. The 48"x96" sheet size covers standard cabinet backs or panel runs in a single piece in many layouts, which reduces seams during fabrication. The matte Finish (58) imparts a warm, pleasing effect that enhances the beauty of color and produces greater clarity and depth, so the Flax White tone presents as a clean, understated surface wherever the liner is exposed inside a project.
This laminate is identified as Formica HPL in the Edgebanding & Surfacing category, so it installs using typical high pressure laminate bonding methods onto suitable panel substrates in cabinet shops. The Grade C9 cabinet liner classification ties its installation primarily to the back or non-show faces of laminate panels, where it balances decorative faces and supports moisture control in interior environments. Its .020" thickness affects bond-up by adding only a thin layer to the substrate, which influences adhesive spread rates and press setups in production. The 48"x96" sheet size guides cutting layouts, allowing full-height or full-depth interior cabinet panel sections to be cut from one sheet in many common casework dimensions.
The SAP description "CABINET LINER, FLAX WHITE" identifies the product as a cabinet liner in the Flax White color, which suits interior cabinet surfaces where a neutral tone is preferred behind stored items. Its classification as a Grade C9 - Non decorative surface steers it toward back faces and interior panels that support balancing rather than primary show surfaces, which fits typical use on the reverse side of decorative Formica HPL. The light duty interior use designation focuses its role on interior cabinet or casework spaces, where panels face normal indoor exposure instead of high-traffic or exterior conditions. Because this laminate is described as being for balancing and moisture control of laminate panels, it is intended to be paired with decorative laminates in panel layups, helping keep doors, gables, and backs flat in kitchen, bath, or storage cabinetry.
The .020" Thickness gives the liner a defined, thin construction that contributes balancing mass without matching the thickness of many decorative faces, which matters when engineers or fabricators consider panel build-ups and target thicknesses. Its Matte Finish (58) imparts a warm, pleasing effect that enhances the beauty of color and produces greater clarity and depth, so interior cabinet surfaces maintain a uniform, readable Flax White tone when doors are open. The 48"x96" size simplifies planning repeatable cut lists for cabinet runs, because common cabinet side and back dimensions can be nested efficiently within one sheet. The description placing this product in Edgebanding & Surfacing | Formica HPL confirms it as part of the broader Formica laminate system, which supports consistent material behavior alongside decorative Formica surfaces in combined panel assemblies.
This product is described as a Grade C9, non decorative surface cabinet liner for balancing and moisture control of laminate panels, so it serves as the back-side laminate layer in interior panel constructions.
The liner is described for light duty interior use as a cabinet liner, so it is used on interior or back panels of laminate casework rather than as the primary decorative face.
The stated .020" thickness designates a thin laminate layer, which adds balancing material and moisture control to a panel without significantly increasing overall panel thickness.
The Grade C9 rating is described as a non decorative surface cabinet liner, indicating it is intended for balancing and moisture control rather than high-wear decorative applications.
The Matte Finish (58) is described as imparting a warm, pleasing effect that enhances color and produces greater clarity and depth, which supports a consistent Flax White look inside cabinets.
The 48"x96" size is a full-sheet format, allowing many cabinet sides, backs, or interior panels to be cut from one sheet in typical casework dimensions.
The product name Formica 8591-58 Flax White Laminate, 48"x96" Matte Finish defines a specific Formica Corporation Grade C9 cabinet liner matched to interior, light duty cabinet applications. Its role as a non decorative surface for balancing and moisture control of laminate panels ties directly to building stable laminate casework with coordinated interior color. The .020" thickness, 48"x96" sheet size, and Matte Finish (58) all support planning efficient cut lists and interior appearances when pairing this liner with decorative Formica HPL. For cabinet and woodworking projects using laminate panel construction, this Flax White cabinet liner provides the specified backing layer for interior balancing and moisture control.
Sold In: 1 Sheet