
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Micro-Pocket Drill Guide Kit 530 uses a Micro-Pocket drill guide block and drill bit to create compact pocket holes, so you can join parts where standard pocket holes take up too much room. The kit works with 500-Series Pocket-Hole Jigs, so existing setups on those jigs stay familiar while you switch to smaller pocket holes. These Micro-Pocket pocket holes are 25% smaller in diameter than standard pocket holes, which lets joints fit in tight spaces and keeps the hole size matched to smaller workpieces. The setup suits small projects, 1/2 inch material, and narrow stock, so common cabinet, furniture, and repair tasks can be handled without changing to a different joinery method.
The Micro-Pocket drill guide block is inserted into a 500-Series Pocket-Hole Jig, so the jig becomes the anchor point while micro pockets are drilled. Using the Micro-Pocket drill bit with this guide block controls both the angle and the reduced diameter of the pocket hole, so the joint geometry remains predictable on 1/2 inch material and narrow stock. Because the kit is for 500-Series Pocket-Hole Jigs and Kreg pan-head pocket-hole screws, the drilling and fastening steps follow a consistent pattern from standard to micro pockets, which keeps layout, clamping, and drilling motions aligned with your existing pocket-hole workflow.
The Kreg Tool Micro-Pocket Drill Guide Kit 530 is designed for small projects, 1/2 inch material, and narrow stock, so it fits work where part size limits standard pocket holes. On 1/2 inch stock, the Micro-Pocket drill bit and guide block work together to keep the pocket sized for the thinner material, which helps maintain a usable edge margin on the face and back of the workpiece. When drilling into narrow stock down to 1 inch wide, the 25% smaller pocket-hole diameter leaves more uncut material beside the pocket, which supports better holding strength along the edge of stiles, rails, or narrow supports. Because the kit is used with 500-Series Pocket-Hole Jigs, the same jig fences and stops position these smaller pockets, so spacing and repeat drilling on narrow parts remain consistent from piece to piece.
The Micro-Pocket drill guide creates pocket holes that are 25% smaller in diameter than standard pocket holes, so the KPHA530 helps reduce the visual and structural impact of each hole on compact workpieces. This smaller diameter concentrates the bore around the Kreg pan-head pocket-hole screws, so the screw head fills the pocket properly and drives the joint together without extra voids around the head. For small projects and repairs, this controlled fit lets you place pockets where they are needed on 1/2 inch and narrow stock, which helps keep joints tight while respecting the limited surface area. Because the Micro-Pocket drill guide block installs into the 500-Series Pocket-Hole Jig, the system preserves the jig's normal drilling angle and layout while only changing the pocket size, so switching between standard and Micro-Pocket setups can follow the same referencing habits across different woodworking jobs.
Micro-Pocket Drill Guide Kit 530 works with a 500-Series Pocket-Hole Jig and Micro-Pocket drill bit to create compact pocket holes, so joints can be placed on small projects and repairs.
The Kreg KPHA530 is for use with 500-Series Pocket-Hole Jigs, so it fits into those jigs to provide the Micro-Pocket drilling setup on thin and narrow stock jobs.
The Micro-Pocket drill guide drills pocket holes that are 25% smaller in diameter than standard pocket holes, so the smaller bore suits narrow or compact workpieces.
The Micro-Pocket Drill Guide Kit 530 is used for small projects, repairs, 1/2 inch material, and narrow stock, so it helps when standard pocket holes take up too much space.
The KPHA530 works with 1/2 inch stock and narrow stock down to 1 inch wide, so it covers many thin panels and slim parts in cabinet and furniture work.
The Micro-Pocket drill guide is for use with Kreg pan-head pocket-hole screws, so the screw head geometry aligns with the smaller-diameter Micro-Pocket holes.
The Micro-Pocket Drill Guide Kit 530 from Kreg Tool lets 500-Series Pocket-Hole Jigs create pocket holes that are 25% smaller in diameter than standard pockets, so joints can be placed on 1/2 inch and narrow stock. Because it is for small projects and repairs and uses Kreg pan-head pocket-hole screws, the kit aligns with existing Kreg pocket-hole workflows while shifting to more compact joints. Select the Kreg KPHA530 when pocket-hole work on thin or narrow pieces requires smaller, well-fitted pocket holes.
Sold In: 1 Each