Amerock single roller catch BP97452G is a large zinc roller-style catch that holds a door or panel closed by engaging a matching strike. This catch provides a positive holding point, which matters when you want doors to stay shut without using a keyed lock. The base measures 1-1/2 inches long by 2-1/8 inches wide by 7/8 inch high, so installers can plan mounting locations on face frames or cabinet interiors with predictable footprint and clearance. The 2-inch length reference in the product name signals a compact catch that still offers enough body for solid mounting while working in tight cabinet spaces. The zinc construction gives the catch a metal housing, which is useful wherever a metal latch is preferred over plastic for cabinet or light door applications.
The Amerock 2 inch long single roller catch uses a base measuring 1-1/2 inches by 2-1/8 inches by 7/8 inch high, which guides where it can sit on cabinet rails, stiles, or interior panels without interfering with adjacent hardware. The 7/8 inch height indicates how far the catch projects, helping installers judge door clearance as the roller meets the strike. The 1/16 inch by 1-3/4 inch strike size defines the contact surface, which is important when aligning the strike on the door so the roller seats firmly. Because the catch and strike are sized to work together, the dimensions support repeatable alignment across multiple doors in a run.
The large zinc roller catch BP97452G belongs to the locks and latches, catches category, positioning it for cabinet and similar door applications where a mechanical hold is needed without a lock cylinder. Its single roller mechanism works with the 1/16 inch by 1-3/4 inch strike, so when the door closes, the roller compresses and then seats behind the strike, helping keep the door shut until pulled open. The 1-1/2 inch by 2-1/8 inch base size offers enough surface area to mount on common cabinet framing, which supports use on kitchen, utility, or shop cabinets that match those proportions. The 7/8 inch height allows the catch to present the roller at a defined elevation, which simplifies choosing a strike location that lines up with the roller centerline for consistent closing action.
The Amerock single roller catch ships as a catch and strike sold together, so the roller profile and strike lip are engineered as a pair, which supports repeatable engagement from one installation to the next. The precise 1-1/2 inch by 2-1/8 inch base dimensions help installers transfer measurements from a layout drawing directly to the workpiece, reducing layout variation when outfitting banks of doors. The 1/16 inch thickness of the 1-3/4 inch long strike keeps the contact edge thin, helping the roller transition with less resistance, which can reduce the effort required to close the door. The zinc construction provides a consistent metal surface on both catch body and visible parts, which matters when a metal latch appearance is desired across matching cabinets or fixtures specified with similar hardware.
The BP97452G catch base measures 1-1/2 inches long by 2-1/8 inches wide by 7/8 inch high, which defines the footprint and projection to plan cabinet or door mounting.
The matching strike for this roller catch measures 1/16 inch by 1-3/4 inches, giving a slim, long contact surface that guides how it is positioned on the door edge or face.
This Amerock product is a single roller catch, so a spring-loaded roller engages the strike to hold the door closed until pulled open, useful for non-locking cabinet doors.
The BP97452G is classified under locks and latches, catches, so it functions as a catch component when planning cabinet or light door hardware sets.
This roller catch is described as zinc, so the body and visible parts present a metal zinc finish that coordinates with other zinc-finished cabinet hardware.
The product is identified as a large roller catch in zinc, making it suitable when a larger catch body and metal appearance are preferred over smaller or nonmetal options.
The Amerock 2 inch long single roller catch BP97452G combines a defined 1-1/2 inch by 2-1/8 inch base with a matched 1/16 inch by 1-3/4 inch strike, giving installers predictable geometry for cabinet or light door projects. The zinc construction and large catch body support jobs that call for a metal roller-style latch rather than a magnetic or plastic option. For runs of cabinets or repeated builds, using the same BP97452G roller catch through Wurth Baer Supply helps keep hardware specifications consistent from project to project.
Sold In: 1 Each