Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Tenn-Tex C-417-01 is a right-hand adjustable rear mounting socket designed to support undermount drawer slides at the rear of the cabinet in installations where components are located with 10mm dowels rather than screws. Sized to seat at 46mm or 50mm, it delivers the rear bearing point an undermount system needs when the cabinet side is bored for dowel-style hardware placement.
Undermount slides need support at both ends of the cabinet run. At the front, locking devices carry the drawer box; at the rear, a mounting socket gives the slide its fixed point against which the drawer travels. In CNC-bored or line-bored production environments, dowel-located rear sockets drop into pre-bored 10mm holes without the step of driving screws — a real time saver when hundreds of drawers are going in. The C-417-01 covers the right side of that rear connection, and its adjustment range across 46mm and 50mm spacing means one SKU works across cabinet builds that land on either of those dimensions rather than requiring a different bracket for each.
This is a Tenn-Tex Plastics component — molded plastic construction, which is standard for this type of pilaster and mounting hardware. Plastic brackets in production drawer systems keep installation fast, resist corrosion in the closed cabinet environment, and present no sharp edges against drawer box sides or cabinet interiors. Color and finish details are not specified in the source data; verify with the current stock if color matching to cabinet interiors is a requirement for your job.
Cabinet shops running production undermount drawer programs on CNC equipment are the primary buyer here. A box of 400 makes sense when a single run covers dozens of cabinets and rear sockets are consumed two per drawer. Designers and contractors specifying undermount hardware for renovation work will also need to match the rear socket to the slide system already in use — this bracket is a Tenn-Tex component and should stay within its compatible slide program. It is not a cross-brand fitting. Face-frame and frameless builds both need rear socket support for most undermount slide families, and the dowel-mount style is common in shops that do not want an extra screw step at the rear of the cabinet side.
Two — one right-hand and one left-hand bracket per drawer, one on each rear cabinet side. The C-417-01 is the right-hand member only; order the matching left-hand socket separately to complete the rear support for each drawer.
Those are the two undermount spacing dimensions this bracket is adjustable across — different undermount slide families locate at one or the other. Confirm your slide's rear spacing requirement before installing so the bracket seats at the right position.
This is a Tenn-Tex component; use it within the compatible Tenn-Tex undermount program. Rear mounting sockets are not universal — slide brands and series use different rear fitting geometries, and a mismatched socket will not seat or support the slide correctly.
Rear mounting sockets are typically used in both face-frame and frameless builds where the slide needs a rear anchor point. In face-frame construction the rear of the cabinet side is the common location for this socket; confirm your slide manufacturer's installation spec for the exact bore position.
No. Rear mounting sockets for undermount slides are handed components; the C-417-01 is right-hand only and is not reversible. Using it on the left side will misalign the slide and the drawer box.
A properly supported rear socket is what keeps an undermount drawer tracking straight through thousands of open-close cycles. The C-417-01 puts the right-side rear anchor where it needs to be, in a dowel-mount format that fits seamlessly into a CNC-bored production workflow — and a box of 400 means the supply keeps pace with the build.
Sold In: 400 Each