
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
T2 HVLP Gravity Feed Mini Spray Gun is a compact spray gun designed for easy glazing and professional grade touch up work, so cabinet and woodworking projects get controlled coverage without switching tools between detailing tasks. The T2 mini gravity spray gun uses a glazing nozzle that eliminates spray and wipe steps, which speeds up glazing work while cutting down on wasted material. The glazing nozzle operates with no air needed when applying glaze, so you can lay down product precisely without adjusting air supply during that part of the process. The spray gun is HVLP compliant with low air consumption of 4 CFM, which helps it run efficiently on typical shop air systems while still delivering fine control. This setup is aimed at any touch up situation where consistent finish and reduced rework matter.
The T2 HVLP Gravity Feed Mini Spray Gun uses its gravity feed layout to keep material above the gun body, which helps maintain a steady supply of glaze or finish to the nozzle during touch up work. The low air consumption of 4 CFM shapes how it fits into shop air layouts, because it can share air supply with other tools without overwhelming the compressor. HVLP transfer efficiency at 65 percent or better helps more glaze or finish land on the work surface, which supports consistent color and sheen on doors, drawer fronts, and trim pieces. The integrated air adjusting valve lets users trim air pressure at the gun as they move from glazing to general detailing, helping dial in the fan pattern and atomization for each step.
The CA-T2-GLAZE T2 HVLP Gravity Feed Mini Spray Gun is set up for easy glazing and professional grade touch up, so it fits naturally into cabinet shops and woodworking environments focused on detailed finish work. The glazing nozzle is configured to eliminate the spray and wipe process, which is especially useful on profiles, moldings, and panel details where wiping can pull glaze out of recesses. Because the glazing nozzle does not need air when applying glaze, operators can move around doors and frames without adjusting air hoses for that step, keeping attention on even coverage in corners and edges. The gun is described as great for detailing and touch ups, so it serves well on small repairs, edge coverage, and isolated color corrections where a full-size gun would be unwieldy.
With HVLP compliance and 65 percent or better transfer efficiency, the gun supports controlled application on cabinet parts and trim pieces while limiting overspray around adjacent components. This transfer efficiency is valuable when working on assemblies that are already installed or partially finished, because more material lands where it is aimed, reducing the need to mask nearby areas. The low air consumption of 4 CFM allows the spray gun to operate on compact shop compressors frequently found in small finishing rooms, which supports mobile touch up work around the shop floor or in tight spray areas. Pairing the gravity feed layout with small cups helps keep the gun light and easy to maneuver, which is important during extended detailing sessions where operators work close to the surface.
The T2 mini gravity spray gun with PTFE needle packing is built to maintain a reliable seal around the needle, which supports smooth trigger pull and repeatable material flow from one job to the next. This PTFE-based sealing helps the internal components move consistently, which aids in holding the same fan pattern and output during a run of similar parts. The integrated air adjusting valve gives users immediate control over air supply at the gun body, so fine tuning atomization when shifting from tight glazing lines to broader touch up areas can happen in seconds. This direct control reduces trips to central regulators and keeps adjustments in the operator's hand, which is valuable during on-the-fly corrections.
The gun operates at a low air consumption of 4 CFM, aligning airflow with the requirements of a mini spray gun used for detailing, and this helps maintain stable patterns even when the air system is supporting other tools. HVLP transfer efficiency at 65 percent or better means that a high portion of the glaze or finish leaves the nozzle onto the target surface, supporting uniform coverage and reducing clouding in the spray area. The availability of plastic and aluminum twist top cups lets operators choose cup material that suits their finishing environment, while the twist top design keeps the material connection secure during movement around workpieces. Together, these design details support repeatable touch up results and efficient glazing steps on cabinets, furniture parts, and trim components.
The T2 HVLP Gravity Feed Mini Spray Gun is designed for easy glazing and professional grade touch up, so it handles both decorative glazing steps and small finish repairs in woodworking and cabinet work.
The glazing nozzle on the T2 mini gravity spray gun eliminates spray and wipe steps, providing speed and material savings by placing glaze where it is needed without wiping off excess material.
The glazing nozzle on the CA-T2-GLAZE spray gun needs no air when applying glaze, so glaze is applied without routing air for that step, simplifying control during detailed work.
The T2 HVLP Gravity Feed Mini Spray Gun draws only 4 CFM, so it places a modest load on the air system and fits well with smaller shop compressors used for finishing work.
The HVLP rating of 65 percent transfer efficient or better means more glaze or finish lands on the work surface, supporting consistent coverage and reducing overspray in the spray area.
The PTFE needle packing in the T2 mini gravity spray gun helps seal around the needle for smoother operation, supporting consistent material flow and repeatable patterns during touch up work.
The T2 HVLP Gravity Feed Mini Spray Gun from C.A. Technologies combines a glazing nozzle, HVLP efficiency, and low 4 CFM air demand to support glazing and touch up tasks in cabinet and woodworking shops. Its no-air-needed glazing nozzle and 65 percent or better transfer efficiency focus material where it is needed, while the air adjusting valve and PTFE needle packing support consistent patterns during detailing. For shops looking to streamline glazing steps and upgrade touch up control, this mini gravity spray gun offers a focused tool built around those finishing needs.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CXCA60-T2-10 Mfr# CA60-T2-10 | T2 Repair Kit |