Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Quadro Locking Device Set with Spacer secures Hettich Quadro drawer fronts using dedicated front fixing clips, so the front attaches positively to the runner hardware. The set contains both left and right front fixing clips, which lets you handle one complete drawer front connection with matched components from one manufacturer. The locking device is designed for both 5/8 inch (16 mm) and 1/2 inch (13 mm) drawer subfront thickness, so you can use the same part number across common drawer constructions. Two optional spacers are used for 1/2 inch (13 mm) drawer subfront thickness, which brings thinner fronts into the same working plane as thicker ones for consistent engagement. A plus or minus 2 mm tool-less height adjustment is built into the locking device, allowing the installer to move the front up or down without tools during fitting. Minimum drawer inside width is 6-1/2 inch (165 mm), which defines the narrowest drawer interior this set is intended to serve in practice.
The Quadro Locking Device Set with Spacer uses front fixing clips that mount to the drawer subfront, so the front becomes the direct interface between the Quadro runners and the drawer face. The design supports both 5/8 inch (16 mm) and 1/2 inch (13 mm) drawer subfront thickness, which means the same mounting layout can be carried across different material thicknesses in a job. Two optional spacers are used for 1/2 inch (13 mm) drawer subfront thickness, and these elements bring the thinner front out to the working depth expected by the clip, which helps the locking tabs engage as intended. A plus or minus 2 mm tool-less height adjustment in the device lets you shift the front vertically at the clip, so you can bring multiple drawers into line along a stack using the hardware mechanism. The recommended #6 x 7/8 inch flat head screw per clip fits the fixing holes and embeds into typical drawer front substrates, which supports solid fastening while keeping the head flush in the countersink.
The Hettich Quadro Locking Device Set with Spacer is applied at the drawer subfront where the Quadro runners connect, so it acts as the bridge between the sliding hardware and the cabinet front layout. The set contains both left and right front fixing clips, placing a dedicated locking point on each side of the drawer, which supports even load distribution from the front into the runners. Design coverage for 5/8 inch (16 mm) drawer subfront thickness matches a commonly used material size in cabinet shops, so production drawers built from this stock thickness can use the clip directly. Coverage for 1/2 inch (13 mm) drawer subfront thickness allows the same part number to be used in lighter drawer constructions as well, which can simplify inventory and ordering across different lines. Two optional spacers are used for 1/2 inch (13 mm) drawer subfront thickness, and these parts provide the extra build-out needed so a thinner front still reaches the correct engagement position on the clip body.
The plus or minus 2 mm tool-less height adjustment built into the locking device provides vertical tuning at the hardware connection, which lets you correct small layout shifts or substrate variation at the clip rather than reworking the drawer box. This hardware-based adjustment supports final alignment of drawer reveals, since the front can be shifted up or down without introducing extra holes at the runner or carcase. The specified minimum drawer inside width of 6-1/2 inch (165 mm) defines how close the left and right front fixing clips can be brought together while still operating as intended, which is especially relevant when planning narrow utility or organizer drawers. Using a #6 x 7/8 inch flat head screw per clip aligns the mechanical grip of the screw with the clip geometry and typical front thickness, which helps maintain the clamping force that holds the front against the Quadro runner interface. Because the set is identified as Hettich Quadro Front Clips Right/Left under manufacturer part number 9026839, the part number ties the installed hardware directly to its documented geometry when coordinating across a project.
The Quadro Locking Device Set with Spacer uses left and right front fixing clips to lock the drawer subfront to Quadro runners, so the drawer front is positively engaged with the slide hardware.
The Hettich Quadro front clips are designed for both 5/8 inch (16 mm) and 1/2 inch (13 mm) drawer subfront thickness, so they cover two common drawer front construction thicknesses.
The Quadro Locking Device Set with Spacer uses two optional spacers for 1/2 inch (13 mm) drawer subfront thickness, so thinner fronts are built out to the engagement depth used by thicker fronts.
The Hettich Quadro locking device provides plus or minus 2 mm tool-less height adjustment, so the drawer front can be shifted vertically for reveal alignment without tools.
The Quadro front fixing clips in this set are specified for a minimum drawer inside width of 6-1/2 inch (165 mm), which defines the narrowest interior size where they are intended to operate.
The Hettich 9026839 Quadro clips use a recommended #6 x 7/8 inch flat head screw per clip, so the fastener length and head form match the clip holes and typical drawer substrates.
The Quadro Locking Device Set with Spacer from Hettich America Corporation combines left and right front fixing clips with adjustment and spacing details that match common drawer builds, so it fits naturally into jobs using Quadro runners. Support for both 5/8 inch (16 mm) and 1/2 inch (13 mm) drawer subfront thickness, along with the use of spacers on 1/2 inch fronts, enables the same hardware reference across different construction approaches. The plus or minus 2 mm tool-less height adjustment and the specified minimum drawer inside width of 6-1/2 inch (165 mm) outline how and where the clips are intended to be applied. With manufacturer part number 9026839 clearly identifying Hettich Quadro front clips right and left, this set can be selected whenever those dimensions and Quadro front locking are needed in a project.
Sold In: 1 Set
