PRO Value Series satin nickel knob describes a zinc knob from the PRO Basics collection that delivers a consistent satin champagne finish for cabinet doors and drawers. The 1-1/8 inch diameter head gives a familiar mushroom profile that feels comfortable under hand when opening and closing doors. The 1-1/16 inch projection sets the grip out from the face of the cabinet, giving fingers clearance while keeping the knob visually tight to the surface. Matching the 1-1/8 inch width to the diameter keeps the knob looking balanced from every angle on face frames or slab fronts. The satin champagne interpretation of satin nickel softens reflections on the knob, which helps cabinets read clean under a range of room lighting. Being part of the PRO Basics collection positions this knob as a straightforward option for repeat use across multiple rooms or units.
The 1-1/8 inch diameter on this knob gives installers a clear target when laying out drilling patterns on doors and drawer fronts. The 1-1/16 inch projection positions the gripping surface so hands clear typical door edge profiles without feeling overextended from the face. With an 8-32 x 1 inch screw size stated, this knob aligns with a widely used cabinet knob thread standard, which fits typical door and drawer front thickness ranges in many built-ins. The zinc body works well with common cabinet substrates, so the knob seats firmly against wood or panel materials when tightened. Matching diameter and width simplifies visual alignment across banks of doors and drawers, supporting clean lines on finished runs.
This PRO Value Series knob is identified under decorative hardware and moldings in the knobs class, which positions it for use on cabinet doors and drawers rather than structural applications. The 1-1/8 inch diameter suits standard kitchen, bath, and storage cabinets where a full-hand grip is desired without overwhelming narrow rails or small drawer fronts. Its satin champagne finish reads in the satin nickel family, which coordinates with many satin nickel hinges and pulls commonly specified on cabinetry jobs. The defined 1-1/16 inch projection keeps the knob usable on doors set close to walls or adjacent cabinets, because the grip does not protrude excessively into walkways. The Berenson-related product class context signals that this knob aligns with established decorative hardware sizing used across many cabinet lines.
The 1-1/8 inch diameter and matching width give installers a repeatable dimension when setting reveals between knob edges and door or drawer edges across a run. That consistent round footprint helps maintain even visual spacing on face frames and slab doors during layout. Using a knob with a defined 1-1/16 inch projection means the distance from cabinet face to hand contact stays the same from piece to piece, reducing variation when multiple installers are working the same project. The 8-32 x 1 inch screw size integrates with standard drilling and fastening setups, which streamlines installation on multi-cabinet jobs. Zinc construction supports a stable thread interface with the specified screw, helping the knob seat flush and stay aligned after fastening. Being part of the PRO Basics collection places this mushroom knob within a predictable sizing family, which simplifies repeat ordering for ongoing cabinet programs and service work.
The PRO Value Series satin nickel knob has a 1-1/8 inch diameter and 1-1/8 inch width, which provides a balanced round profile suited to most cabinet doors and drawers.
The knob projection is 1-1/16 inch, which sets the gripping surface out from the cabinet face for finger clearance while keeping the knob close for a trim look.
The mushroom knob is made from zinc, which gives a solid feel on doors and drawers and works well with typical cabinet fastening methods.
The finish is satin champagne, which delivers a satin nickel style appearance that coordinates with many satin nickel decorative hardware elements.
The listed screw specification is 8-32 x 1 inch, which matches a common cabinet knob thread and length used on many door and drawer fronts.
This knob is part of the PRO Basics collection in the PRO Value Series, which positions it as a straightforward choice for consistent decorative hardware layouts.
This PRO Value Series satin nickel knob pairs a 1-1/8 inch diameter with a 1-1/16 inch projection, giving a familiar mushroom shape that works across many cabinet door and drawer layouts. The zinc construction and satin champagne finish place it firmly in the satin nickel family, supporting visual alignment with existing satin nickel decorative hardware. With its 8-32 x 1 inch screw size and role within the PRO Basics collection, this knob suits projects where consistent dimensions and repeatable hardware selection matter. Spec this knob when a straightforward, satin nickel style round pull is needed for cabinet work.
Sold In: 1 Each