Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH19T048OUF1 to RSRCH19T048OUF1.
Omega National 48"W Red Oak Tapered Farmhouse Wall Mount Range Hood gives a kitchen a wood hood framed around a 48 inch cooking area, so the hood becomes a focal point while still supporting a standard wall-mounted installation layout. The tapered farmhouse design shapes the chimney profile, which helps it visually step back toward the ceiling and integrate with surrounding wall cabinets or open shelving. The red oak construction provides a wood surface that can be finished to match or contrast other red oak components in the room, allowing consistent grain and color across the project. As a wall mount wood range hood, it defines the cooking zone on a straight wall run, which aligns well with common 48 inch cooktops or ranges. The stated 48 inch width and 24.75 inch height give clear outside dimensions, so the hood can be planned into upper cabinet elevations and appliance spacing.
This tapered farmhouse chimney, listed at 48 inches wide and 24.75 inches high, gives clear outside dimensions for planning the hood on a kitchen wall, so cabinet drawings and appliance spacing can be laid out around those measurements. The wall mount designation indicates it is intended to install against a wall rather than in an island position, which shapes how duct routing and surrounding wall cabinets are arranged. The tapered chimney form affects how close adjacent cabinets or panels can step up beside the hood, because the lower section presents the full 48 inch width while the upper section narrows. The red oak construction keeps all exposed wood surfaces in one species, which helps finishing shops plan stain or clear-coat schedules around a single wood type for the hood structure.
This Omega National 48"W Red Oak Tapered Farmhouse Wall Mount Range Hood is designed for wall mount kitchen locations, so it fits best above a range or cooktop placed on a straight run of cabinets. The 48 inch width aligns naturally with cooking appliances of similar width, which supports a centered installation over a 48 inch range for a symmetrical look. Its 24.75 inch chimney height establishes a fixed vertical element, which works well in kitchens where the designer wants the hood to stop below the ceiling and transition into crown or a finished soffit. The tapered farmhouse style helps the hood blend with traditional or transitional cabinet lines, because the wider lower section anchors the cooking area while the narrower upper section lightens the mass near the ceiling. The red oak material lets the hood connect visually with other red oak cabinet doors, moldings, or panels in the kitchen, creating a unified wood species story across the room.
The SAP description listing 48 by 24.75 inch dimensions tells the installer and designer exactly how much wall space the tapered farmhouse chimney occupies, which reduces guesswork when aligning wall studs, duct paths, and cabinet terminations around the hood. The consistently referenced 48 inch width also helps when calculating clearances to adjacent cabinets, since the hood footprint can be drawn accurately in plan and elevation views. The description noting a Broan compatible liner signals that the hood is built around a liner size intended to work with Broan components, which streamlines pairing the wood shell with a ventilation insert based on Broan sizing conventions. That compatibility reference supports coordination between the wood range hood shell and a Broan-compatible liner during design, so the ventilation equipment and decorative wood enclosure follow the same dimensional framework. The manufacturer part number RCH19T048OUF1 uniquely identifies this specific red oak tapered farmhouse wall mount model, which matters when matching future orders or aligning project documentation to this exact hood.
The RCH19T048OUF1 is an Omega National 48"W Red Oak Tapered Farmhouse Wall Mount Range Hood, so it functions as a wood wall hood centered over a cooking area.
The Omega National 48"W Red Oak Tapered Farmhouse Wall Mount Range Hood has a stated width of 48 inches, which helps align it with 48 inch cooking appliances and surrounding cabinetry.
The tapered farmhouse chimney is listed at 24.75 inches high, giving a fixed vertical dimension for planning wall cabinet heights, crown terminations, and overall hood elevation.
This product is described as a wall mount range hood, so it is intended to be installed against a wall in a straight cabinet run above a cooking surface.
The hood is described as a red oak tapered farmhouse wall mount range hood, so its exposed wood components are red oak for coordinated finishing.
The description notes a Broan compatible liner, indicating the wood hood is sized to work with a liner built to Broan compatibility standards for the ventilation insert.
The Omega National 48"W Red Oak Tapered Farmhouse Wall Mount Range Hood, with its 48 inch width and 24.75 inch height, is suited to projects built around a 48 inch cooking zone on a straight wall. The tapered farmhouse chimney profile offers a defined focal point while easing into upper wall space, which supports balanced cabinet elevations. The red oak construction keeps the hood within a red oak material palette, aligning with other red oak components in the room. For projects requiring a wall mount wood hood sized around Broan compatible liner dimensions, this RCH19T048OUF1 model provides a clearly defined footprint and part number to specify in kitchen plans.
Sold In: 1 Each