Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf waste pullout gives an 18 inch base cabinet waste pullout option for buyers who want a built-in cabinet trash pullout with a finished wood frame and quiet operation. This bottom mount trash pullout is designed for an 18 inch base cabinet and uses a dovetail plywood box with a semi-gloss finish. Rev-A-Shelf lists this model with two 35 quart waste bins, full-extension concealed soft-close slides, and patented door mount brackets. The brackets provide 5 inches of adjustability and include a micro-trim adjuster, which helps installers fine-tune door alignment after mounting. The product is TSCA Title VI compliant and is sold as each.
Key specs to confirm: This bottom mount trash pullout is designed for an 18 inch base cabinet and includes two 35 quart waste bins. Buyers should confirm the cabinet opening, interior depth, and available height will accept the dovetail plywood box, bin size, and full-extension slide travel. Because this is a door mount waste pullout, confirm the cabinet door can be attached and adjusted using the patented brackets with 5 inches of adjustability and a micro-trim adjuster. Rev-A-Shelf verifies a 75 lb slide rating and TSCA Title VI compliance. Any additional dimensional, safety, or installation details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are the Rev-A-Shelf pullout unit and two 35 quart white bins. The product is sold as each.
What to verify before ordering: Confirm your cabinet is an 18 inch base cabinet, check interior clearance for the pullout and bin height, verify your door-mount plan, and review installation guidance for bottom-mount attachment and local building requirements where applicable.
A soft-close waste pullout like this is often chosen when a buyer wants to move trash off the floor and into a cabinet without giving up easy access. In a kitchen remodel, the common pain point is keeping waste close to the prep area while still maintaining a clean cabinet front. This Rev-A-Shelf waste pullout addresses that use case with a bottom-mount design, a finished dovetail plywood box, and a door-mount setup that allows the cabinet door to open with the pullout.
For a homeowner replacing a freestanding can, the two 35 quart waste bins can support simple sorting inside one cabinet. One bin can be used for trash and the other for recycling, or both can be used for higher-volume waste in a busy kitchen. For an installer, the patented door mount brackets matter because they provide 5 inches of adjustability plus a micro-trim adjuster. That adjustment range can help when aligning the attached door for a clean reveal after the pullout is mounted.
The full-extension concealed soft-close slides also support daily use. Full extension means the pullout travels out far enough to improve access to the bins. Concealed slides keep the hardware less visible. Soft-close action helps the unit return smoothly instead of shutting hard. Rev-A-Shelf also lists the slides as 75 lb rated, which gives buyers a verified load reference for normal use planning.
Fit remains the key buying step. This 18 inch base cabinet waste pullout is designed for that cabinet size, but buyers should still confirm interior dimensions, available depth, and door attachment conditions before ordering. If your cabinet has obstructions, unusual framing, or hardware that may interfere with slide travel, those conditions should be checked against the manufacturer guidance before installation.
When buyers compare a bottom mount trash pullout to more basic waste storage options, the main differences usually come down to access, door integration, and installation control. A loose bin inside a cabinet may cost less upfront, but it does not provide the same guided slide movement, contained frame, or attached-door operation. This Rev-A-Shelf unit is built as a dedicated cabinet trash pullout with verified components that support a more consistent install.
The maple waste pullout frame uses a dovetail plywood box with a semi-gloss finish, which can matter to buyers who want the interior hardware to match the quality level of surrounding cabinetry. The concealed soft-close slides and full-extension travel also separate this product type from simpler slide-out trays or non-soft-close hardware. For installers, the micro-trim adjuster and bracket adjustment range can make final door positioning more manageable than fixed-mount approaches.
This double bin trash pullout also offers a practical advantage over single-bin layouts when sorting is part of the plan. Instead of adding a second loose container elsewhere in the kitchen, both 35 quart waste bins stay in one pullout assembly. That can help maintain a cleaner workflow in compact spaces. As with any cabinet accessory, buyers should compare cabinet size, interior clearance, and door mounting needs rather than assuming one pullout style fits every base cabinet.
This Rev-A-Shelf waste pullout is designed for an 18 inch base cabinet. Buyers should still confirm interior clearance and door-mount conditions before ordering.
This bottom mount trash pullout includes two 35 quart white bins.
This cabinet trash pullout uses full-extension concealed slides with soft-close action.
This door mount waste pullout includes patented door mount brackets with 5 inches of adjustability and a micro-trim adjuster.
This 18 inch base cabinet waste pullout is designed for an 18 inch base cabinet.
This Rev-A-Shelf model uses a dovetail plywood box with a semi-gloss finish.
This double bin trash pullout requires buyers to confirm cabinet opening, interior depth, available height, and door attachment clearance.
This soft-close waste pullout is listed with a 75 lb rated slide system.
This product summary confirms core fit and hardware details, but buyers should follow manufacturer installation guidance and local building requirements where applicable.
Double bin trash pullout buyers should focus on cabinet fit, included bins, and door-mount requirements before purchase. This Rev-A-Shelf unit is designed for an 18 inch base cabinet and includes two 35 quart white bins, a dovetail plywood box, concealed full-extension soft-close slides, and adjustable door mount brackets. Before ordering, confirm your cabinet interior clearance, planned door attachment, and any installation details not shown in the product summary so the pullout matches the cabinet and the jobsite requirements.
Sold In: 1 Each