Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel molded cushion glide describes a furniture glide built with a nickel plated steel shell and molded cushion insulation, so contact with the floor is buffered and furniture movement is quieter on finished surfaces during everyday use. The base diameter of 7/8 inch spreads weight over a larger area, which helps reduce concentrated pressure points where tables or work surfaces rest on wood or similar floors. A thickness of 3/8 inch sets a consistent height under each leg, supporting level setups when the same glide is used on all points. The nail length of 13/16 inch gives a firm bite into the furniture leg material, which matters when pieces are dragged or shifted under load. The 3/32 inch nail size keeps the penetration area compact, useful when working with smaller legs where larger fasteners could split or distort the stock.
The nail-on design of these silent glides uses a 13/16 inch long nail at 3/32 inch size, so the glide is driven directly into the leg without separate fasteners, speeding installation on multiple pieces. The nickel plated steel shell forms a rigid cap around the base, so a hammer strike on the glide transfers force cleanly to the nail while the shell helps protect the cushion from direct impact. With a 7/8 inch base diameter and 3/8 inch thickness, each glide establishes a repeatable stand-off from the floor, which is useful when matching leg heights across several tables or cabinets on the same run. The molded cushion insulation works under the shell, so the installed glide supports quieter movement and a softer transition as weight shifts across hard surfaces.
The classification as furniture glides in the Work Surface and Tables category positions these pieces for use under tables, cabinets, and similar furniture where controlled sliding contact is needed. The 7/8 inch base diameter suits legs or frames with enough landing area to fully support the glide, which helps keep the load centered over the nail when the furniture is pushed or rotated. With nickel plated steel as the shell material, these glides suit interior woodworking projects where metal-to-floor contact must stay smooth under normal service. The molded cushion insulation between shell and floor moderates the interface, so applied loads transfer more gradually during movement, useful in spaces where noise reduction from sliding furniture is important.
The combination of 3/8 inch thickness and 7/8 inch diameter creates a predictable stand-off profile, so installers can calculate finished heights accurately when specifying leg lengths or apron clearances. The 13/16 inch long nail penetrates deeply into the leg stock, so pull-out resistance is enhanced when furniture is dragged instead of lifted. At 3/32 inch nail size, the penetration path remains narrow, which helps retain material strength around the nail in many common furniture woods. The nickel plated steel shell supplies a smooth, hard face that maintains its shape under point loading from heavy work surfaces, so repeated repositioning remains consistent over time. The molded cushion insulation backs this shell, so impact loads from setting furniture down are moderated through the glide rather than transferring sharply to the floor.
The glides are classified as furniture glides in the Work Surface and Tables category, so they are suited for tables, cabinets, and similar furniture pieces needing floor contact control.
The 7/8 inch base diameter spreads the furniture load over more floor area, which reduces concentrated pressure and helps limit floor marking under typical service conditions.
The molded cushion insulation sits under the nickel plated steel shell, so it softens contact with the floor and supports quieter, smoother furniture movement when sliding.
The 13/16 inch nail length provides deep engagement into the furniture leg, so the glide seats firmly and resists loosening when pieces are pushed or repositioned.
The 3/8 inch thickness adds a defined layer under each leg, so using the same glide on all legs supports consistent finished height and alignment across a project.
The nickel plated steel shell forms a hard outer surface, so it resists deformation under load and keeps sliding action predictable over time on typical interior floors.
This nickel plated steel molded cushion silent glide with 7/8 inch base diameter, 3/8 inch thickness, and a 13/16 inch by 3/32 inch nail offers a defined profile for controlling how furniture meets the floor. For work surfaces, tables, or cabinets that rely on stable support and moderated movement, these Selby Furniture Hardware glides provide a consistent way to set stand-off height and spread load across hard flooring. When a project calls for furniture glides that combine a rigid steel shell with molded cushion insulation, this G6ZNN model from Wurth Baer Supply aligns closely with that requirement.
Sold In: 1 Each