Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
16 and 17 gauge construction stapler power is the core of this Senco Products, Inc. 9Y0001N tool, which is designed as an air powered heavy duty stapler for demanding construction and woodworking tasks. The stapler drives 16 and 17 gauge staples with a 7/16 inch crown, up to 2 inches in length, so it handles a wide range of fastening jobs from lighter framing to thicker assemblies. That drive capacity supports applications such as furniture framing, where consistent staple penetration helps joints stay tight under load. The tool weight of 5.8 lbs balances enough mass for stable driving with a weight level that supports repeat firing and job-site movement. As a construction stapler in the woodworking tools and equipment category, it fits into power-tool workflows where speed, depth control, and consistent fastening are critical for productivity.
This air powered heavy duty stapler uses pneumatic power, so it integrates into shops and job sites already running air systems for other tools. Driving 16 and 17 gauge staples with a 7/16 inch crown up to 2 inches means fastener selection can be matched to joint thickness and material density within that range. The 20% power gain over the standard NS20XP gives extra driving margin for applications like sheathing or subflooring, where staples must pull panels tight. At 5.8 lbs, the tool weight contributes to controlled recoil while remaining manageable during overhead or extended-use tasks such as roof decking or fascia work.
The SAP description identifies this tool as a 16 and 17 gauge construction stapler, and the web description lists a wide range of applications: furniture framing, sheathing, crate and box assembly, subflooring, pallets, roof decking, fascia, and cedar shingles. In furniture framing, the combination of 7/16 inch crown and up to 2 inch length supports building frames and bracing where multiple members meet and need secure fastening. In sheathing and subflooring, the additional 20% power over the standard NS20XP helps drive staples fully into panel and framing combinations, so edges pull tight across the field. For crate and box assembly and pallets, the heavy duty air power and stable drive track support repetitive fastening into softwood or similar materials. In roof decking, fascia, and cedar shingles, the air powered design and balanced 5.8 lb weight help maintain control while working across roof planes and trim runs.
The 20% more powerful drive than the standard NS20XP gives this stapler extra energy behind each 16 or 17 gauge 7/16 inch crown staple, which is important when firing into dense framing, layered panel products, or thick shingle builds. The new drive track design eliminates movement of the staple during the drive cycle, so both legs follow a consistent path and seat more uniformly, improving holding strength and appearance across long runs. That same track design virtually eliminates fastener jams, skipping, and misfires, which reduces time spent clearing problems and helps keep production lines or field crews focused on layout and fastening instead of tool interruptions. The enhanced EZ-Clear latch supports quick access when a fastener does need attention, which shortens reset time and keeps workflow steady. Finally, the well-balanced, ergonomic design described for all-day use means the 5.8 lb tool weight is distributed to reduce strain, helping installers maintain consistent positioning and staple placement over long shifts.
The Senco Products, Inc. 9Y0001N stapler drives 16 and 17 gauge staples with a 7/16 inch crown, up to 2 inches long, covering many framing, sheathing, and assembly tasks.
The 16 and 17 gauge construction stapler delivers 20% more power than the standard NS20XP, driving staples deeper into tough or layered materials for secure seating in demanding applications.
The new drive track design eliminates staple movement and virtually eliminates jams, skipping, and misfires, which supports smoother fastening and reduces downtime during repetitive work.
The enhanced EZ-Clear latch allows quick access to clear fasteners, so any obstruction is dealt with faster and the stapler returns to productive driving sooner.
The tool weight of 5.8 lbs gives the stapler enough mass for stable driving while remaining light enough to handle repetitive firing across furniture framing, panels, and decking.
The 16 and 17 gauge construction stapler is described for furniture framing, sheathing, crate and box assembly, subflooring, pallets, roof decking, fascia, and cedar shingles.
The Senco Products, Inc. 9Y0001N 16 and 17 gauge construction stapler pairs air powered heavy duty operation with 20% more power than the standard NS20XP, so it tackles furniture framing through roof decking with consistent driving. Its 7/16 inch crown range up to 2 inches and improved drive track design support accurate, jam-resistant fastening. The 5.8 lb, well-balanced, ergonomic build suits all-day use across framing, panels, pallets, and shingles. For shops and crews that rely on pneumatic tools, this stapler offers a focused option for demanding staple-driven work.
Sold In: 1 Each