Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand rear bracket for Blum's TANDEMBOX drawer system, M height, in Gray. It mounts at the back of the cabinet to anchor the runner and keep the drawer box aligned through years of daily use. If you're building or restoring a TANDEMBOX installation and need the right-side rear support, this is the part.
Rear brackets are the component most likely to be missing when a TANDEMBOX installation gets ordered piecemeal or when a drawer is retrofitted into an existing cabinet. Face-frame cabinet builds in particular rely on rear brackets to anchor the runner at the back wall, since there is no continuous side panel for the full runner length to bear against. This bracket handles that rear anchor point on the right side. In frameless builds, rear brackets are equally important for maintaining runner alignment when the cabinet depth is at the minimum for the chosen nominal length.
The bracket is finished in Gray, the standard color for TANDEMBOX system hardware. The finish is matched to TANDEMBOX runner and side-profile components so the cabinet interior presents a consistent look. Material construction follows Blum's standard for system accessories — formed to hold position under load without flex or creep at the mounting point.
Cabinet shops running TANDEMBOX M-height drawers reach for this bracket when building face-frame cases, when a rear bracket is damaged and needs replacing, or when a drawer system is being extended into a retrofit opening. Designers specifying TANDEMBOX for a full kitchen should verify that rear brackets are included in the component count — they are easy to overlook on a bill of materials when attention is on the runner and front-fixing order. This bracket is handed: order one right-hand and one left-hand bracket per drawer to complete the rear support.
This bracket is made for the TANDEMBOX system at M height. TANDEMBOX ANTARO and other Blum platforms use their own rear brackets, which are not interchangeable. Match the bracket to the specific TANDEMBOX series and side height in your build.
Yes, in most TANDEMBOX frameless installations the rear bracket is still required to properly locate the runner at the cabinet back. Check the Blum installation guide for your nominal length to confirm the mounting requirement for your specific cabinet depth.
Left-hand and right-hand brackets are separate SKUs because the two sides are mirror-specific parts, not identical pieces. Order one right-hand and one left-hand bracket to complete the rear support for a single drawer.
The bracket is rated for TANDEMBOX M height. Compatibility across nominal lengths should be confirmed against Blum's fitting instructions for the specific runner length being used, as cabinet depth and runner length affect the bracket's mounting position.
A missing or wrong rear bracket is one of the most common reasons a TANDEMBOX drawer installation stalls. Having the correct right-hand M-height bracket on hand in Gray keeps the build moving and the runner seated exactly where Blum engineered it to be.
Sold In: 50 Each