Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 550mm Design Profile for the Hettich AvanTech YOU drawer system, a plastic finishing profile in Anthracite that fits over the drawer side profile to deliver a coordinated, color-matched interior appearance.
In the AvanTech YOU system, the drawer side profile carries the structural and running load, and the design profile is the outer aesthetic layer that the eye actually sees. Specifying Anthracite here keeps the drawer interior consistent when the rest of the cabinet hardware — handles, runners, or interior accessories — is also finished in dark tones. The 550mm length matches the corresponding AvanTech YOU side profile length, so there is no gap at the front or overhang at the back; the cover sits flush for the full depth of the drawer.
This profile is a component, not a complete drawer system. It belongs in a build that already includes the AvanTech YOU side profiles, runners, front fixings, and back for the same nominal length and finish family.
The profile is molded plastic in an Anthracite color finish. Plastic is the standard material for AvanTech YOU design profiles across the finish range; it keeps the component light, allows the precise snap-fit or slide-on geometry the system requires, and holds the color consistently across the profile's full length. Anthracite reads as a near-black, charcoal tone — a practical choice when the goal is a dark or monochromatic drawer interior rather than a contrast-color accent. Match it to the Anthracite AvanTech YOU side profiles and any Anthracite front fixings or cover caps specified for the same drawer.
Cabinet shops building AvanTech YOU drawer systems in Anthracite need one design profile per drawer side at the matching nominal length. The profile is typically specified at the same time as the side profiles and runners, not after the fact, because mismatched finishes are impossible to fix once the drawer is assembled and the front is hung. Kitchen designers specifying handle-less dark-finish interiors reach for Anthracite profiles to carry the color through the whole drawer, not just the front. Replacement orders also come from shops correcting a finish-family mismatch or covering a profile damaged during shipping or installation.
No. The Design Profile is engineered for the AvanTech YOU platform specifically. Other Hettich drawer lines use their own profile geometry and are not interchangeable with AvanTech YOU components.
A standard drawer has two sides, so you need one design profile per side — two profiles per drawer. Order accordingly when planning a full run of cabinets.
The 550mm design profile is sized for 550mm nominal length AvanTech YOU side profiles. If your drawer system is a different nominal length — for example 400mm, 450mm, or 500mm — order the design profile in the matching length for that system.
Technically possible, but finish coordination is the entire point of specifying a design profile. For a consistent interior, pair Anthracite design profiles with Anthracite AvanTech YOU side profiles, front fixings, and cover caps.
When the drawer interior needs to match the Anthracite finish family through every visible component, this design profile closes the last gap — turning the raw side profile into a finished surface that holds the color from front to back.
Sold In: 200 Each