Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Tenn-Tex C-705 is a non-handed, rear-mounted adjustable bracket with 8mm dowels, designed to support undermount drawer slides at the back of the cabinet. Because it carries no stop mechanism, it suits installations where the stop function is handled elsewhere or is simply not required for the application.
Undermount slides need support at both ends. At the front, a locking device anchors the drawer box; at the rear, a bracket like this one keeps the slide aligned and level inside the cabinet. The C-705 is the right choice when the back of the cabinet — whether a face-frame or frameless box — requires a dedicated rear anchor and the job does not call for a built-in stop. That makes it a natural fit for custom casework where the stop is already controlled by the slide itself or by the drawer box geometry, and adding a second stop would interfere with travel or adjustment.
The 8mm dowel mount means accurate placement depends on correctly bored holes, not on finding stud locations or wrestling with screws in a tight rear cavity. Shops running a drill press or CNC can bore the pattern once and drop brackets in repeatably across a run of cabinets.
Tenn-Tex builds this bracket in plastic, consistent with the rest of the QuikTRAY and pilaster-system accessory line. The 8mm dowels are pre-mounted and press into bored holes; no additional fasteners are required at the dowel locations. The non-handed body keeps left and right installations identical, which matters on production runs where bracket orientation can create kitting errors.
Cabinet shops outfitting face-frame cabinets with undermount slides are the core buyer. In a face-frame box, the slide's rear end floats without a direct cabinet-side bearing point unless a rear bracket supplies one — and this bracket is that bearing point. The no-stop version serves builders who prefer to let the slide or drawer front control travel limits, or who are working with a slide series that already integrates its own stop. Designers and contractors specifying high-run kitchen or bath projects will want to confirm the dowel bore pattern against the slide manufacturer's installation template before committing to volume quantities.
The C-705 is non-handed — one bracket fits either the left or right rear position, so you stock a single part number for both sides of every drawer.
A stop-equipped rear bracket physically limits how far the drawer travels into the cabinet. The C-705 omits that stop, leaving travel control to the slide mechanism or drawer front. Use it when your slide already has an integrated stop or when the installation geometry handles drawer depth another way.
The bracket is rear-mounted and intended for face-frame installations where the slide's back end needs support, but it can serve frameless construction too when the layout calls for a separate rear anchor. The bore pattern must match the bracket's 8mm dowel spacing — confirm against the slide manufacturer's drilling template before installation.
The source data does not name a specific slide series. Because rear brackets and drilling patterns are slide-specific, confirm compatibility with the slide you are installing before ordering. This bracket is a Tenn-Tex component — pair it with slides and front hardware from the same compatible program.
Pack quantity is not specified in the available product data. Check the product listing or contact the sales desk for current pack size before placing a volume order.
When the back of the cabinet needs a solid, level bearing point and the stop is already handled elsewhere, the C-705 fills that role without adding hardware conflicts — non-handed, dowel-mounted, and ready for production-scale boring patterns.
Sold In: 1 Each