Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Tenn-Tex C-419-01 is a right-hand adjustable rear mounting bracket for undermount drawer slides, designed for 10mm dowel attachment in face-frame cabinet construction. Sized for 31mm and 35mm cup dimensions, it ships in a box of 400 for production shops running high slide volumes.
Face-frame cabinets set the cabinet side back from the front frame, which means the rear end of an undermount slide has no direct panel face to fasten to. A rear mounting bracket bridges that gap, giving the slide a solid, level bearing point at the back. This right-hand bracket positions at the rear of the right cabinet side. In a face-frame run, every drawer opening needs one right-hand and one left-hand bracket — the C-419-01 covers the right side of that pair.
The 10mm dowel mounting method suits production environments where a drilling template bores consistent holes across a cabinet batch. Once the holes are in, the bracket presses in without screws, which removes a fastening step from each install cycle and keeps positioning repeatable from cabinet to cabinet.
The bracket is built for 31mm and 35mm cup dimensions — the range that covers most undermount slide programs running in residential and light commercial face-frame cabinetry. The adjustable design accommodates minor depth variation at the rear of the cabinet, which is especially useful in site-built or older face-frame cases where depths are not always consistent. Tenn-Tex manufactures this bracket as a matched component in its undermount bracket line, so the geometry aligns with the other Tenn-Tex brackets in this series.
Cabinet shops installing undermount slides in face-frame boxes are the primary buyer. The 400-count box format suits production lines where rear brackets are ordered alongside slides in bulk. Retrofit and refacing contractors who regularly work inside face-frame cabinets will also find the pack size practical — a single box covers a significant number of drawer openings before a reorder is needed. This bracket is for indoor cabinetry; its role is structural positioning, not corrosion resistance, so keep it to dry interior applications.
Two — one right-hand and one left-hand. The C-419-01 is the right-hand member only. Pair it with the left-hand C-419 to support both sides of the drawer at the rear.
The source data does not specify compatible slide brands or series by name. Confirm fit against your slide manufacturer's rear bracket requirements before ordering — rear brackets are not universal across brands or series.
Use the drilling template specified by your slide or bracket manufacturer for the 10mm dowel pattern. Tenn-Tex does not include a template in this box; order the appropriate template separately if your shop does not already have one.
Rear mounting brackets are designed for face-frame construction, where the slide's back end needs support beyond the cabinet side. In a frameless cabinet, slides typically fasten directly to the interior panel and do not require a separate rear bracket.
Yes — the C-317 is the screw-on version in the same 31mm/35mm size range. Choose the mount type that matches your shop's drilling and fastening process.
With 400 brackets per box and a design built specifically for right-hand face-frame rear mounting, the C-419-01 keeps production moving without piecemeal reorders or mismatched hardware slowing down the install.
Sold In: 400 Each