Polyester Edgebanding H3710, Natural Carini Walnut 0.8 mm Thick, 23 mm Width x 246 FT

Polyester Edgebanding H3710 For Natural Finishes

Polyester edgebanding H3710 describes this Egger Wood Products, LLC edge banding, which finishes exposed panel edges so they visually match the Natural Carini Walnut surface. The 0.8 mm thickness adds a defined edge layer that supports a solid, furniture-grade look on cabinets or casework. The 23 mm width covers standard panel edges while allowing a slight overhang for precise trimming and clean visual lines. A 246 FT length enables longer runs on a project before changing rolls, which supports smoother shop workflow on repetitive cuts. The Natural Carini Walnut design ties edges to matching board décor, keeping grain and color consistent around the piece. The Omnipore Matte finish uses a graceful distribution of wood pores with various sizes and depth to create a natural-looking surface that visually resembles real wood pores. A light sub-texture provides a velvet touch, giving the edge a soft, tactile feel that matches modern furniture expectations.

Natural Carini Walnut Details That Support Jobs

• The Natural Carini Walnut design matches that décor, so finished panel edges carry the same character as the surface, which keeps cabinet fronts and shelves visually unified.
• The Omnipore Matte finish uses wood pores in various sizes and depth, creating a natural appearance that helps the edge blend with wood-look panels in finished installations.
• A light sub-texture gives the surface a velvet touch, so the edge feels smooth to the hand in daily use while still echoing the look of open wood grain.
• The 0.8 mm thickness provides a defined band of material, which supports a substantial edge profile that holds its visual presence on doors, drawer fronts, and panels.
• The 23 mm width spans typical board thicknesses with room for trim operations, aiding accurate flush finishing along cabinet and furniture edges.
• The 246 FT roll length supports multiple components from a single run, helping maintain consistent appearance across a complete project using the same edge banding.

Edge Banding Dimensions That Guide Installation

This Egger edge banding uses a 0.8 mm thickness, so installers can plan trimming and corner details around a moderate edge layer that balances profile and workability. The 23 mm width suits many panel thicknesses, letting fabricators process edges with standard trimming setups while maintaining full coverage. The 246 FT length per roll supports batching parts from the same material lot, which helps projects maintain uniform Natural Carini Walnut edges from start to finish. The H3710 designation ties this banding to that décor reference, guiding shop planning when pairing board stock and edging. Together, these dimensions and identifiers let production teams schedule cutting, edgebanding, and finishing stages with predictable material usage around this specific Natural Carini Walnut polyester edge banding.

Using Natural Carini Walnut Edgebanding In Projects

Where Natural Carini Walnut H3710 Works Best

This polyester edge banding from Egger Wood Products, LLC is suited to projects that specify the H3710 Natural Carini Walnut décor, because the edge pattern is designed to visually coordinate with that look. The Omnipore Matte finish, with its graceful distribution of wood pores in various sizes and depth, supports applications where a natural wood appearance is desired on man-made substrates. On vertical cabinet fronts or tall panels, the 23 mm width spans the edge while leaving room for trimming, helping the finished line read straight from top to bottom. Shelving and horizontal components also benefit from the 0.8 mm thickness, which delivers a clear edge band without overwhelming the overall profile. Across kitchens, built-ins, or commercial casework that use Natural Carini Walnut décor, this edge banding helps keep edges visually tied to the primary surface.

Details That Support Consistent Edge Appearance

The Omnipore Matte surface structure uses controlled wood pores and depth, which helps each run of edge banding present a repeatable natural look along multiple parts in a job. A light sub-texture provides a velvet touch, so the edge feels consistently smooth across doors, drawer fronts, and panels that see frequent contact. The 246 FT length provides enough material to run many components from a single roll, supporting visual consistency of grain effect and color tone over the full installation. The 0.8 mm thickness offers a practical balance between edge presence and machining behavior, so trimming and finishing can produce clean lines that align with surrounding panels. By matching the H3710 Natural Carini Walnut décor name and the manufacturer part number 1380330, this edge banding gives shops a clear reference for repeat orders when projects call for the same Natural Carini Walnut finish in future work.

Key Questions About This Natural Carini Walnut Edgeband

Choose This Edge Banding For Matching Walnut Decor

Polyester edgebanding H3710 in Natural Carini Walnut from Egger Wood Products, LLC gives panel edges a coordinated finish whenever that décor is specified. The 0.8 mm thickness, 23 mm width, and 246 FT length work together to support efficient production while maintaining a consistent Natural Carini Walnut appearance across doors, drawer fronts, shelves, and casework. The Omnipore Matte finish, with its graceful wood pore structure and velvet touch, keeps edges visually and tactually aligned with modern wood-look surfaces. For projects built around the H3710 Natural Carini Walnut décor name or the 1380330 part reference, this polyester edge banding provides the defined, matching edge treatment needed to carry that look across every exposed edge.