Polyester Edgebanding F422, White Linen 0.8 mm Thick, 23 mm Width x 246 FT

Polyester Edgebanding F422 White Linen Use

Polyester edgebanding F422 white linen defines this Egger Wood Products, LLC edge banding as a dedicated solution for finishing exposed board edges with a coordinated white linen decor. The 0.8 mm thickness creates a modest edge build that covers core material while keeping a clean transition to the surface, which supports precise casework and furniture lines. The 23 mm width gives coverage for typical panel thicknesses with extra tolerance for trimming, which helps maintain a straight visual edge along cabinet sides, shelves, or doors. The 246 FT length in a single run supports longer production stretches on edgebanders or consistent application in a shop setting, which reduces changeovers during repetitive work. The white linen decor links directly to Egger F422 designs, so projects using that decor can carry the pattern across edges for a uniform appearance on finished components.

Key White Linen Deepskin Rough Advantages

• The Egger Wood Products, LLC brand ties this edgebanding to the F422 white linen design family, which helps match edges to panels from the same decor line for consistent finished surfaces across cabinets or fixtures.
• The 0.8 mm thick construction provides a defined yet modest edge profile, which supports clean trimming operations and produces a finished edge that does not overpower flat surfaces in visible installations.
• The 23 mm width offers coverage for common panel thicknesses with additional working margin, which gives installers room to position and trim the banding while still achieving a tight, straight edge reveal.
• The 246 FT length supplies extended run capacity for production or shop use, which allows longer sequences of banding application without frequent coil changes during repetitive cabinet or furniture builds.
• The Deepskin Rough finish is described as an authentic texture for natural and rustic decors, which lets this edgebanding visually support solid wood reproductions or similar designs where texture contributes to the overall effect.

Egger Edge Banding Fit And Dimensions

This polyester edge banding is specified at 0.8 mm thick, which interacts well with typical machining allowances by providing enough material for flush trimming while keeping edge build subtle on doors, drawer fronts, and carcass parts. The 23 mm width offers generous coverage over the panel face and back edge areas, so the working margin helps maintain alignment even when panels vary slightly within normal tolerances. The defined width-to-thickness ratio suits straight-edged components where a clean, linear appearance is desired, which supports consistent reveals across cabinet runs. Because it is part of the F422 white linen decor, the dimensions and visual design work together to carry that specific look from large surfaces down to narrow edges.

Using White Linen Deepskin Rough In Projects

Where Egger F422 White Linen Works Best

This edge banding sits in the Edgebanding & Surfacing, Edgebanding, Polyester category, so its role is to finish exposed edges on boards used in cabinetry, furniture, and other woodworking projects. The white linen decor designation connects it to projects built around Egger F422 designs, letting the same visual identity extend to doors, end panels, and shelving edges. The Deepskin Rough finish is described as an authentic texture for natural and rustic decors, which positions it well for use with solid wood reproductions where texture supports the overall design intent. When these characteristics are combined, the banding can visually bridge between textured flat panels and the narrow edge strips, so installations maintain a coherent natural-leaning appearance along all exposed faces.

The polyester construction places this product within the polyester edge banding class, aligning it with applications where a formed decorative layer is applied to panel edges for both protection and appearance. With the 0.8 mm thickness and 23 mm width, the banding suits straight-edge workpieces that need a precise, narrow edge treatment to match an F422 white linen surface. The extended 246 FT length supports repetitive tasks such as runs of cabinet parts or case components, keeping the visual pattern and texture consistent from piece to piece. By using the defined Deepskin Rough texture and white linen color on every edge in a project, the installer can maintain the same design story from broad surfaces through to tight edge details.

Common Questions About F422 White Linen Edging

Selecting This White Linen Edge Banding

Choosing this Egger Wood Products, LLC polyester edgebanding F422 White Linen 0.8 mm Thick, 23 mm Width x 246 FT aligns edge treatment with the F422 decor for cohesive projects. The combination of white linen color, Deepskin Rough texture, and practical dimensions supports cabinet, furniture, and interior woodworking that rely on natural or rustic-inspired designs. For work centered on Egger F422 white linen surfaces, this edge banding ties exposed panel edges into the same visual language from broad faces to tight edges.