Dynabrade Dynabug II Replacement Pad gives you a medium-density sanding surface that supports consistent stock removal on typical woodworking jobs. The pad uses a hook & loop attachment, so abrasive discs mount quickly and stay aligned during use, which saves setup time between grits. The 3/8 inch urethane thickness cushions the disc, helping the pad conform to minor surface variations while keeping edges from digging in on flat panels. This pad is identified as 5 inch diameter with a hook-face design, so it matches disc-backed abrasives built for 5 inch hook-and-loop vacuum pads. A 5/16 inch-24 male thread connection ties directly into compatible Dynabrade tools, giving a solid interface that resists wobble during sanding. The pad is described as medium density, which balances cut rate and surface finish for general-purpose sanding on wood projects.
This Dynabrade sanding disc backing pad is described as a 5 inch vacuum disc pad with 8 holes, so the hole layout aligns to discs drilled for 8-hole dust extraction and directs debris into the vacuum path during sanding. The hook-face design works with hook & loop abrasive discs, letting you press discs into place without tools and peel them away when changing grits. A 5/16 inch-24 male thread is built into the pad, so it threads directly onto tools using this spindle size and thread pattern for a secure mechanical connection. The 3/8 inch urethane layer sits between the tool and abrasive disc, so it acts as a controlled cushion that supports even pressure across the sanding surface.
This pad is identified as a Dynabrade Dynabug II Replacement Pad, so it matches sanding setups built around Dynabrade Dynabug style tools that use a 5/16 inch-24 male thread connection. The pad is specified as a 5 inch diameter vacuum disc pad with 8 holes, so it works in sanding stations that rely on 8-hole vacuum discs to move dust away from the workpiece through the pad face. The hook-face surface interfaces with hook & loop-backed abrasives, so it fits workflows that standardize on hook-and-loop discs for rapid grit changes across multiple operators or shifts. The 3/8 inch urethane thickness pairs with the medium density description, so it fits tasks that call for some compliance to contours while still maintaining a firm enough backing to level seams or machine marks.
The pad is described as medium density with a 3/8 inch urethane thickness, so it offers controlled flexibility under hand pressure, which helps keep the abrasive in contact on slightly uneven surfaces without washing out edges. This medium build resists collapsing under normal sanding loads, so the pad helps maintain a flatter sanding plane when working wide panels or face frames. The 8-hole vacuum pattern is built into the pad, so dust generated at the cutting surface has a defined path away from the work area, which can support better visibility and more consistent disc performance over a run. The 5/16 inch-24 male thread is integrated into the pad body, so torque transfers directly from the tool to the backing pad, supporting steady disc speed and predictable scratch patterns. The hook-face surface is part of the pad construction, so discs attach across the full face, which helps reduce slippage and keeps the abrasive working evenly from center to edge.
The product is named Dynabrade Dynabug II Replacement Pad and carries manufacturer part number 56316, so it is identified for use in Dynabug-style sanding setups using that pad reference.
The pad uses a hook-face surface that works with hook & loop discs, so discs press on and pull off quickly, which shortens downtime when switching grits or replacing worn abrasives.
The 3/8 inch urethane layer provides a cushioned backing, so pressure spreads more evenly across the disc, helping manage cut aggressiveness and limit gouging on wood surfaces.
The pad has a 5/16 inch-24 male thread connection, so it screws onto tools built with that spindle, creating a solid mechanical link for controlled sanding motion.
The pad is described with 8 holes in the face, so when paired with matching vacuum discs, dust routes through these openings toward the collection system during sanding.
The pad is described as medium density, so it suits general-purpose sanding where you need enough firmness for leveling while still having cushioning for controlled finishing passes.
This Dynabrade Dynabug II Replacement Pad combines a 5 inch, 8-hole vacuum disc layout, a hook-face attachment surface, and a 3/8 inch medium-density urethane body, so it supports efficient sanding and dust movement in Dynabrade-based workflows. The 5/16 inch-24 male thread connection ties it directly to tools built for that spindle, letting you use hook & loop discs in a controlled, medium-density setup. Use this pad when your sanding process depends on quick disc changes, consistent contact, and vacuum-ready hole alignment across repeated woodworking tasks.
Sold In: 1 Each