Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf base cabinet tray divider gives narrow base cabinets a dedicated pull-out area for trays, wraps, and other odd sized kitchen items. This Rev-A-Shelf 447 Series organizer is a maple base cabinet organizer with soft-close slides, adjustable tray dividers, and adjustable door mount brackets for easier fit-up at the door. The unit comes fully assembled, with a solid maple base and back, and includes patented tri-slides that help prevent side-to-side motion when the organizer is pulled out. The RS447-BCSC-5C is designed as a tray divider and foil wrap organizer for base cabinetry, with a center tray divider and T-Bar so the storage area can be arranged to suit the items you need to keep upright and accessible.
Key specs to confirm: This maple base cabinet organizer is listed at 21-3/4 inches deep and 19-5/8 inches high. Verified width differs by cabinet construction: 5-1/2 inches wide for face frame applications and 5-9/16 inches wide for frameless applications. Buyers should confirm inside cabinet opening, usable depth, door attachment layout, and clearance for pull-out travel before ordering. The door mount brackets allow up to 5 inches of flexibility, which can help with door alignment, but cabinet obstructions should still be checked. The verified load rating is 100 lb. Any other performance, compliance, or installation details not shown here should be confirmed through the manufacturer or technical documentation.
What's included: The Rev-A-Shelf 447 Series unit comes fully assembled and includes adjustable tray dividers, adjustable door mount brackets, patented tri-slides, a center tray divider, and a T-Bar.
What to verify before ordering: Confirm face frame or frameless cabinet style, opening width, inside depth, inside height, door mounting position, and whether nearby hinges or interior hardware could interfere with the pull-out organizer.
A soft-close cabinet pull-out organizer like this one is useful when a narrow base cabinet tends to collect sheet pans, serving trays, cutting boards, foil boxes, parchment, or other long items that do not stack well. Instead of laying these pieces flat or letting them slide around inside the cabinet, the tray divider and foil wrap organizer creates upright storage with adjustable tray dividers and a center divider. That layout can make it easier to separate wide trays from boxed wraps and keep each item visible when the unit is extended.
For installers, the fully assembled design can simplify the job because the main organizer body is already built. The adjustable door mount brackets provide up to 5 inches of flexibility, which helps when aligning the cabinet door to the pull-out. That can be useful on a range of door styles where exact mounting position needs some adjustment during install. Buyers should still confirm cabinet opening dimensions and check for any interior obstructions before ordering.
The Rev-A-Shelf 447 Series is also built with a solid maple base and back, which suits cabinet interiors where repeated loading and unloading is expected. The patented tri-slides are specifically called out as helping prevent side-to-side motion, so the organizer stays more controlled while being pulled from the cabinet. For buyers looking for a solid maple organizer that handles odd sized kitchen items, this base cabinet pull-out system is intended for that exact task. If your project depends on a specific door overlay, hinge clearance, or mounting pattern, those details should be verified against the cabinet and installation guidance.
When comparing a base cabinet pull-out system, the most useful details are the cabinet type it fits, whether the unit ships assembled, how the door mounts, what storage adjustments are included, and how stable the organizer stays during travel. This Rev-A-Shelf base cabinet tray divider addresses those points with verified dimensions for face frame and frameless cabinets, a fully assembled body, adjustable door mount brackets, adjustable tray dividers, and tri-slides that help control side movement.
Another practical comparison point is storage purpose. Some pull-outs are meant for general pantry goods, while this tray divider and foil wrap organizer is designed for odd sized kitchen items. That makes it more relevant for narrow storage zones where vertical separation matters. The included center tray divider and T-Bar support that use by helping buyers tailor the interior space to the items they actually store.
Material and slide behavior also matter during selection. The solid maple base and back provide a cabinet-grade structure, while the soft-close slides support smoother daily operation. The verified 100 lb weight capacity gives buyers a concrete load reference. If a project requires details beyond those listed here, such as exact mounting hardware dimensions or technical drawings, those should be confirmed before purchase so the organizer matches the cabinet opening and door setup.
This Rev-A-Shelf 447 Series organizer is listed at 5-1/2 inches wide, 21-3/4 inches deep, and 19-5/8 inches high for face frame applications.
This Rev-A-Shelf base cabinet tray divider is listed at 5-9/16 inches wide, 21-3/4 inches deep, and 19-5/8 inches high for frameless applications.
The Rev-A-Shelf 447 Series unit comes fully assembled, which can help reduce setup time during installation.
This soft-close cabinet pull-out organizer includes adjustable door mount brackets with up to 5 inches of flexibility for door alignment.
This tray divider and foil wrap organizer is designed to store odd sized items such as trays, wraps, and other narrow kitchen pieces.
The Rev-A-Shelf organizer includes patented tri-slides that help prevent side-to-side motion and improve stability during pull-out use.
The RS447-BCSC-5C includes adjustable tray dividers, adjustable door mount brackets, a center tray divider, a T-Bar, and tri-slides.
This Rev-A-Shelf base cabinet pull-out system is rated at 100 lb weight capacity.
This base cabinet organizer requires confirmation of cabinet type, opening width, inside depth, inside height, and door clearance before purchase. Follow manufacturer installation guidance and local building requirements where applicable.
Tray divider and foil wrap organizer buyers should confirm cabinet construction, opening size, and door mounting layout before purchase. This Rev-A-Shelf unit includes a fully assembled organizer body, adjustable tray dividers, adjustable door mount brackets, a center tray divider, T-Bar, and patented tri-slides. With verified face frame and frameless dimensions, solid maple construction at the base and back, and a 100 lb rating, it is built for narrow base cabinet storage where upright access matters. Check fit carefully so the organizer matches the cabinet and door setup you are working with.
Sold In: 1 Each
