Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pull-out gives kitchen cabinets a concealed waste storage setup with a maple bottom-mount frame and two 35 quart silver bins. This Rev-A-Shelf bottom mount waste pullout is part of the 4WCBM Series and ships fully assembled for faster setup at the cabinet. The built-in Rev-A-Motion mechanism uses gas spring assistance for soft open and soft close action, and it also provides 1 inch of overtravel for access. For buyers comparing a garbage pullout for trash can or recycling use, this model is designed for cabinet installation in face frame and frameless construction. The carriage is made from maple wood with dovetail construction, and the frame includes built-in door mount brackets.
Key specs to confirm: This double 35 quart waste container is a bottom-mount cabinet waste pull-out with two silver plastic bins, a maple dovetail carriage, built-in door mount brackets, and Rev-A-Motion soft-open and soft-close operation. It is designed for face frame sizes of 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch, and it also works with frameless construction. The manufacturer states a 150 lb maximum weight capacity and notes that 35 quart units include a storage area behind the bins. Before ordering, confirm your cabinet opening, interior depth, door-mount plan, and whether your application needs space for overtravel. If any additional safety, compliance, or dimensional details are required for your job, confirm them with the manufacturer or technical documentation.
What's included: The verified package includes a fully assembled maple waste bin carriage and two 35 quart silver plastic bins. Replacement bins are sold separately.
What to verify before ordering: Confirm cabinet construction type, face frame size or frameless layout, usable interior space, door attachment method, and whether the rear storage area and bin capacity match your garbage or recycling routine.
This garbage pullout fits buyers who want concealed waste storage in a kitchen cabinet without giving up easy access. A common use case is a remodel where the owner wants one cabinet location to handle both trash can and recycling duties. With two 35 quart bins, this Rev-A-Shelf unit gives a split layout that can support sorting tasks while keeping containers out of sight. Another practical scenario is a cabinet near a prep sink or main work zone, where frequent opening and closing can make soft motion more useful than a basic slide-out waste basket frame.
The verified Rev-A-Motion system uses gas spring assistance for soft open and soft close movement. That matters for households or workspaces where a rough-sliding waste basket can feel awkward during repeated use. The added 1 inch of overtravel can also help when removing a full bag or reaching the back edge of the bin. For installers, the fact that the unit comes fully assembled can simplify jobsite handling and reduce setup steps compared with products that require more frame assembly.
Fit is the other major concern. This bottom mount waste pullout is designed for face frame sizes of 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch, and it also works with frameless construction. That gives the product a broader cabinet fit range than some wastebaskets that are tied to one cabinet style. The built-in door mount brackets are another useful detail because buyers looking for a rev a shelf cabinet garbage pull out often want the cabinet door to move with the bins. Before purchase, the buyer should still confirm cabinet opening dimensions, interior clearance, and door alignment needs because those exact measurements are not listed here.
The maple carriage with dovetail construction is relevant for buyers who prefer a wood-framed pull-out over an all-metal basket style. The 35 quart version also includes a storage area behind the bins, which can help keep liners or small supplies in the same cabinet. If the cabinet will carry heavier contents, the manufacturer lists a 150 lb maximum weight capacity, and that figure should be followed during planning and use.
When buyers compare a bottom mount waste pullout, they usually look at bin count, motion, cabinet fit, and how much installation work the frame requires. This Rev-A-Shelf model is clearly defined as a double-bin wood carriage with two 35 quart containers, bottom mounting, and built-in door mount brackets. That makes it a strong match for jobs where concealed sorting and a finished wood frame matter more than a basic open wire holder.
Another point buyers often compare is how the pull-out behaves during daily use. This unit includes soft-open and soft-close movement with gas spring assistance, plus 1 inch of overtravel. Those are concrete operating details that help distinguish it from a simpler garbage pull out that only slides in and out. The product is also described as fully assembled, which can support more consistent installation planning because the main carriage arrives built from the factory.
Compatibility is also easier to assess when verified fit details are clear. Here, the manufacturer states face frame compatibility at 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch, along with frameless construction support. Buyers should still confirm cabinet width, depth, and door attachment clearance because those exact dimensions are not provided in the verified data. For replacement planning, it is also useful to know that replacement bins are sold separately. That can matter for long-term maintenance if one bin is damaged or if the user wants to refresh the wastebaskets later.
This Rev-A-Shelf trash pull-out is designed for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes, and it also works with frameless construction.
This bottom mount waste pullout includes two 35 quart silver plastic bins with the fully assembled maple carriage.
This double 35 quart waste container has two separate bins, so it can support a split trash and recycling setup inside one cabinet.
This Rev-A-Shelf waste pull-out has built-in door mount brackets as part of the frame design.
This garbage pullout requires confirmation of cabinet opening size, interior depth, construction type, and door clearance before ordering. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf model is supplied fully assembled, which can reduce installation time compared with knock-down frames.
This 35 quart Rev-A-Shelf configuration includes a storage area behind the bins for small supplies such as liners.
This bottom mount waste pullout has a manufacturer-listed maximum weight capacity of 150 lb.
This Rev-A-Shelf waste pull-out uses bins that are available separately as replacement parts.
Rev-A-Shelf wastebaskets in this pull-out package give you a fully assembled maple carriage, two 35 quart silver bins, built-in door mount brackets, and soft-open and soft-close movement. Before purchase, confirm your cabinet construction, face frame size or frameless layout, interior clearance, and door-mount needs. This double-bin garbage pullout is a practical choice when you want concealed trash and recycling storage with rear accessory space behind the bins and replacement bin availability for future maintenance.