Kreg Shelf Pin Jig 5 mm For Precise Shelves

Kreg Shelf Pin Jig 5 mm is a jig from Kreg Tool designed to add perfectly spaced shelf pin holes to your projects, so installers and woodworkers can lay out adjustable shelving on a consistent 32 mm pattern. Hardened-steel drill guides in the jig control the bit as you drill, which keeps holes straight for level, wobble-free shelves in cabinets and furniture. The drill guides are centered on standard 1-1/4 inch, or 32 mm, spacing, so the jig works with cabinet layouts based on the 32 mm system used in many shops. A 5 mm high-quality brad-point bit works with the guides to drill clean, precise holes that help shelf pins seat square to the panel. The drill guides carry a lifetime warranty, supporting long-term repeat use in a production or jobsite setting.

Key Shelf Pin Jig Details For Cabinet Work

• Hardened-steel drill guides in the Shelf Pin Jig control the drilling path, which helps maintain a straight, repeatable hole pattern for stable, level shelves over the full cabinet height.
• Drill guides centered on 1-1/4 inch (32 mm) spacing establish a 32 mm layout, allowing rows of holes that match common cabinet system dimensions for interchangeable shelf positions.
• The 5 mm high-quality brad-point bit works with the guides to cut clean, precise 5 mm bores, which supports tight-fitting shelf pins and reduces tear-out along the panel surface.
• A fence on the jig aligns it with the edge of the workpiece, which keeps holes the same distance from the front edge and helps rows on left and right cabinet sides line up.
• Six holes can be drilled in one setup with the jig, which speeds repetitive cabinet side drilling and reduces layout time when adding multiple adjustable shelves.
• A second Shelf Pin Jig can be connected to the first, so longer, continuous rows of 32 mm-spaced holes can be drilled while maintaining the same hole spacing across taller panels.

Installation And Layout Using The KMA3232 Jig

The fence on the KMA3232 shelf pin jig registers against the workpiece edge, guiding placement so installers can run straight, accurate rows of 5 mm holes without separate layout lines on every position. That edge reference helps keep holes on opposing cabinet sides aligned, which keeps shelves square when set on pins. The jig body is arranged to drill six holes at one time, so the user can position the fence, drill the guided holes with the 5 mm brad-point bit, then shift the jig to the next section for efficient cabinet side processing. When taller cabinets or furniture sides call for more shelf options, a second jig can be connected to extend the hole pattern, which maintains the 32 mm spacing from top to bottom for a continuous row.

Using The Shelf Pin Jig In Cabinet Construction

Where This Shelf Pin Jig Fits Cabinet Jobs

The Kreg Shelf Pin Jig is suited for adding shelves to existing furniture and for building new cabinets, because the hardened-steel drill guides and 32 mm spacing keep shelf pin holes consistent on both styles of work. On built-from-scratch cases, the drill guides centered on 1-1/4 inch spacing make it straightforward to establish a standard 32 mm system layout, so shelf positions can match across multiple cabinets in a run. When working on existing furniture, the fence aligns the jig with the panel edge, allowing installers to bring older cases closer to a regular pin pattern without complex measuring. For frameless cabinets, the jig adds further value by offering useful features for installing concealed cabinet hinges and drawer slides, integrating shelf hole drilling and hardware layout in the same tool.

Details That Support Accurate Hinges And Slides

The jig has molded-in alignment marks and an indicator window that help align mounting screws for hinge plates on frameless cabinets, which ties hinge locations to the same 32 mm cabinet system used for shelf pins. Those marks and the indicator window give a visual reference to screw positions, helping hinge plates land where concealed hinges operate correctly. The hinge plate layout is set at standard backspacing for a 32 mm cabinet system, so installers can repeat hinge locations across cabinet runs without new calculations. The same indicator also helps with locating the front hole for drawer slide installation in frameless cabinets, tying slide placement to the 32 mm pattern for smoother hardware coordination. By combining 32 mm shelf hole spacing, hinge plate backspacing, and drawer slide front-hole location, the jig supports a unified layout that reduces rework when assembling frameless cabinet hardware.

Common Kreg Shelf Pin Jig 5 mm Questions

Select The Kreg Shelf Pin Jig 5 mm For 32 mm Layouts

The Kreg Shelf Pin Jig 5 mm from Kreg Tool combines hardened-steel drill guides, 5 mm brad-point drilling, and 1-1/4 inch (32 mm) spacing to support accurate adjustable shelving. Its fence-guided alignment, six-hole layout, and 32 mm cabinet system features give installers one jig for shelf pins, concealed hinge plates, and frameless drawer slide front-hole positioning. Choosing this KMA3232 jig through Wurth Baer Supply aligns shelf drilling and hinge layout with a consistent 32 mm workflow on cabinet and furniture projects.