Kreg Panel Carrier is a material handling tool from Kreg Tool that grips sheet goods so they can be moved with a clamp, lift, and go workflow. This carrier is designed for full 4' x 8' sheets, so one person can move plywood and large panels where they are needed. The carrier automatically adjusts to material thickness up to 3/4 inch, so common plywood and panel stock fit without manual setting. Large pads slide over the panel and provide the gripping surface, so load transfer happens through the faces of the sheet instead of fingertips on an edge. Those pads are covered with Kreg Grip Maxx material that creates a strong hold while avoiding dents or marks on even fragile plywood veneers. An ergonomic handle with thick, durable padding spreads pressure across the hand, so carrying heavy sheets puts less pressure on specific contact points.
This Kreg Tool material handling carrier works by sliding the large pads over the edge of plywood or panels, then clamping until the automatic thickness adjustment engages up to 3/4 inch. Once clamped, lifting on the ergonomic handle increases pad pressure, so the sheet is locked as it rises. Grip Maxx pad material is applied to the pad faces, so the contact zone remains secure while also protecting veneers from dents or marks as panels are moved to cutting or assembly stations. The handle is shaped and padded for one-handed carrying, so the other hand is available to steady the sheet or manage obstacles as full-size panels are steered through doorways, around machinery, or onto support stands.
This panel carrier is suited to handling full 4' x 8' sheets in material handling and shop environments, so it fits well into cabinet shops, onsite build areas, and any workflow using large plywood or panel goods. When grabbing sheets off a rack at a store, the carrier grips the panel faces with its large pads, so loading from storage positions becomes a controlled lift instead of a two-person drag. During transport from place to place, the one-handed carry design lets a user keep the panel oriented while still managing door handles or navigating steps. In cutting areas, moving panels around as they are cut becomes faster because the automatic adjustment up to 3/4 inch handles different panel thicknesses without separate adjustments between sheets.
The automatic clamping action that adjusts to material thickness up to 3/4 inch keeps the process consistent from sheet to sheet, so operators can repeat the same motion across a full unit of plywood. The Grip Maxx-covered pads provide a strong, secure hold that resists slipping, so the relationship between hand movement and panel movement stays predictable. Because Grip Maxx is designed not to damage, dent, or mark even fragile plywood veneers, the same tool can be used on both structural sheets and visible faces within the same project sequence. The ergonomic handle with thick, durable padding distributes load across the hand, supporting longer handling sessions without shifting grip. As lifting force increases, the pads squeeze tighter, so grip strength automatically scales with panel weight and position. Together, these details make the panel carrier a repeatable solution for moving large sheets through picking, transport, and cutting stages without constant tool adjustment.
The Kreg Panel Carrier is designed to carry full 4' x 8' sheets, so standard plywood and large panels can be moved at full size from storage to cutting or installation areas.
The panel carrier clamps to automatically adjust to material thickness up to 3/4 inch, so many common plywood and panel thicknesses are handled without separate setup steps.
Grip Maxx on the pads provides a strong, secure hold without damage, dents, or marks, so even fragile plywood veneers can be moved through the shop without surface defects.
The ergonomic handle has thick, durable padding, so load pressure is spread across the hand, supporting one handed carrying of heavy sheets with better comfort and control.
The panel carrier is designed so the more you lift up on the handle, the tighter the pads squeeze, which increases grip as the sheet is raised and moved.
The carrier is useful when grabbing sheets off racks, transporting them from place to place, or moving them around as they are cut, supporting smooth material flow on project work.
The Kreg Panel Carrier from Kreg Tool is built to carry full 4' x 8' sheets with an automatic clamp, lift, and go motion that fits busy shops. Grip Maxx-covered pads adjust to material thickness up to 3/4 inch, so many sheet goods move with the same setup. An ergonomic handle with thick, durable padding keeps one-handed lifting practical, while increasing clamping force as the load rises keeps panels secure. For operations that regularly move plywood and large panels between storage, transport, and cutting, this material handling carrier offers a straightforward way to control sheet movement and protect visible faces.
Sold In: 1 Each