Kreg Drilling Guide makes it easy to create perfectly straight holes without using a drill press, so you can bring accurate drilling to the jobsite or small shops using just a hand drill. The guide features six hardened steel drill guides from 1/8 inch to 1/2 inch that hold your drill in position, which keeps the bit aligned as you drill through solid wood or plywood. Built-in hole alignment marks give a clear visual reference, helping you position the guide for repeatable hole spacing along a workpiece. An ergonomic design with Grip Maxx anti-slip surfaces keeps the guide in place as you work, reducing bit wander right at startup. The guide also self-centers on the edge of 1/2 inch and 3/4 inch material, so edge holes stay perpendicular and centered on common cabinet and furniture stock.
The Kreg Drilling Guide is designed to work with a hand drill, so you can create precisely positioned holes without setting up a drill press. The six hardened steel drill guides from 1/8 inch to 1/2 inch act as bushings that steer the bit, helping maintain a straight path through the cut. When working along edges, the self-centering feature on 1/2 inch and 3/4 inch material positions the bit on the centerline, which is useful when drilling for screws or dowels in cabinet rails and panels. Grip Maxx anti-slip surfaces support solid traction on the workpiece under hand pressure, helping hold alignment as you start the hole and continue to full depth.
The Kreg Drilling Guide fits a range of woodworking and cabinet tasks where straight, perpendicular holes matter. Six hardened steel drill guides in 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, and 1/2 inch sizes handle common drilling needs, so you can work from pilot holes up to larger clearance or dowel holes. The guide automatically centering on the edge of 1/2 inch and 3/4 inch material suits cabinet face frames, shelves, and typical plywood widths, keeping edge holes aligned on the thickness center. Built-in hole alignment marks support layout for multiple holes along a rail or panel, which helps when preparing holes for driving a screw, mounting hardware, or creating a dowel joint.
The hardened steel drill guides provide durable, consistent hole sizing from 1/8 inch to 1/2 inch, which helps maintain accuracy over many drilling cycles compared to unguided freehand drilling. By holding the bit square to the surface, these guides support straight, perpendicular holes that fit screws and dowels as intended. The self-centering action on 1/2 inch and 3/4 inch boards automatically aligns holes on the centerline, which reduces layout steps when preparing edges for joints or hardware. Grip Maxx anti-slip surfaces and an ergonomic body give a secure handhold on the guide, helping maintain steady pressure and alignment during drilling. Using the drill guide for holes for driving a screw, for mounting hardware, or for creating a dowel joint ties these features directly into everyday woodworking and cabinet installation work.
The Kreg Drilling Guide uses six hardened steel drill guides in 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, and 1/2 inch sizes, covering typical pilot, clearance, and dowel hole needs.
The Kreg Drilling Guide uses hardened steel drill guides that hold the drill in position, helping the bit stay aligned and produce straight, perpendicular holes with a hand drill.
The Kreg Drilling Guide self-centers on the edge of 1/2 inch and 3/4 inch material, so edge holes stay centered on common board and plywood thicknesses.
The Kreg Drilling Guide is described for creating straight holes in boards and plywood, making it suited to common woodworking and cabinet materials in those categories.
The Kreg Drilling Guide Grip Maxx anti-slip surfaces help it stay in place as you use it, reducing drill bit wander when starting holes on wood or plywood faces.
The Kreg Drilling Guide is intended for holes used when driving a screw, mounting hardware, or creating a dowel joint, supporting a range of wood joining and installation jobs.
The Kreg Drilling Guide KDG-6000 from Kreg Tool brings drill press-style alignment to hand drill work, using hardened steel guides from 1/8 inch to 1/2 inch for straight, repeatable holes. Self-centering on 1/2 inch and 3/4 inch boards supports cabinet and furniture edges, while Grip Maxx anti-slip surfaces and an ergonomic design help you hold position during drilling. For tasks from driving a screw to mounting hardware or forming a dowel joint, this drilling guide gives a controlled way to position and guide the bit.
Sold In: 1 Each