Karran acrylic double bowl sink provides a double equal bowl kitchen sink manufactured from an ultra high density, 100% pure acrylic resin, so both bowls deliver a consistent surface for bar or prep use. The sink is manufactured by thermoforming using heat and vacuum, which creates a uniform shape that supports accurate cutouts in new countertops. Its underside reinforced with an FRP backing supports the acrylic structure, which matters when the sink is bonded to solid surface, laminate, or undermounted to stone. A 1-1/4 x 3/4 machined resin matrix rim provides a defined mounting edge, which helps installers align the sink in undermount applications. This sink can only be installed in new countertops, not existing countertops with an existing sink cutout, so it is suited to new kitchen or bar projects. Heat, scratch and chip resistant construction supports long-term use in active prep areas.
This white acrylic undermount sink requires undermount installation, and may not be top mounted, so it is designed for use below the countertop surface. The sink can only be installed in new countertops, not existing countertops with an existing sink cutout, which focuses it on new builds or full remodels. This sink may be bonded seamlessly in solid surface and laminate, which lets fabricators create integrated sink-counter runs. It may be undermounted to all stone products with a 1/8 overhang recommended, giving installers a clear target for stone edge fabrication. Digital templates for CNC machines are available at www.karran.com, supporting precise routing for the 31-1/2 inch wide sink. A 25 years Limited Warranty against manufacturer's defects provides long-term support for residential or commercial projects using this A-355-WHITE model.
The Karran Acrylic Series 31-1/2 W white bar/prep undermount sink double bowl, 50/50 split - A-355-WHITE works well in bar or prep layouts where two equal bowls streamline task separation. Its double equal bowl kitchen sink format suits left-right workflow, letting one bowl handle rinsing while the other is used for prep or soaking. Because this sink may be bonded seamlessly in solid surface and laminate, it fits projects where clients want a continuous work surface with integrated bowls in acrylic-based tops. The ability to be undermounted to all stone products with a 1/8 overhang recommended supports stone countertop installations where a clean undermount reveal is part of the design. Heat, scratch and chip resistant construction performs in spaces with frequent pot, pan, and utensil contact. Stain and thermal shock proof performance supports use near cooktops or ice makers without concern for typical thermal cycling.
The sink is manufactured from an ultra high density, 100% pure acrylic resin, which gives a stable body that responds predictably when bonded to solid surface or laminate. Its underside reinforced with an FRP backing adds body strength beneath the acrylic shell, which supports the undermount load when the bowls are filled with water or cookware. The 1-1/4 x 3/4 machined resin matrix rim provides a precise interface for adhesive bonding, helping fabricators position the sink accurately during undermount installation or seamless bonding. Because this sink may be undermounted to all stone products with a 1/8 overhang recommended, fabricators have a clear design guide for cutting and finishing stone edges. Manufacturing by thermoforming using heat and vacuum yields consistent bowl geometry, which supports repeatable CNC cutouts using digital templates from www.karran.com. Completely non-porous acrylic construction helps maintain hygiene-focused surfaces in prep zones while resisting stains over time.
The A-355-WHITE is a Karran Acrylic Series 31-1/2 W white bar/prep undermount sink with double equal bowls and a 50/50 split, suited to kitchen or bar prep layouts.
The sink is manufactured from an ultra high density, 100% pure acrylic resin by thermoforming using heat and vacuum, with the underside reinforced with an FRP backing for structural support.
The sink requires undermount installation and may not be top mounted, so it is designed to sit beneath new countertops rather than drop into an existing opening.
This sink may be bonded seamlessly in solid surface and laminate, allowing integrated sink-counter designs in those materials for bar or kitchen projects.
The sink may be undermounted to all stone products, with a 1/8 overhang recommended, guiding stone fabricators on edge treatment around the bowls.
The sink is heat, scratch and chip resistant, stain and thermal shock proof, and completely non-porous, supporting long-term performance in active kitchen and bar environments.
The Karran acrylic double bowl sink is designed for new countertops, not existing countertops with an existing sink cutout, aligning it with renovation or new construction work. Its white acrylic double equal bowl layout supports bar/prep or kitchen workflows needing two balanced work zones. With undermount installation required and suitability for seamless bonding in solid surface and laminate and undermounting to all stone products, this model fits a wide range of fabrication shops. Add the 25 years Limited Warranty against manufacturer's defects, and this A-355-WHITE sink provides a defined, spec-driven option for upcoming countertop projects.
Sold In: 1 Each