Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Karran Workstation stainless steel sink is a 32 inch wide single bowl undermount kitchen sink made to work in granite, quartz, and solid surface countertops. The T304, 16-gauge stainless steel construction provides a thick, rigid basin that stands up to daily use in busy kitchen environments. Its 18/10 chrome-nickel makeup resists oxidation and rust, so the bowl surface stays structurally sound. A soft satin brushed finish delivers a consistent appearance that also helps hide light marks from regular pot and pan use. Tight radius corners give the sink a modern, squared look while still leaving enough curve to allow easy cleaning along the edges. At approximately 25 pounds, the sink has enough mass to sit solidly in the cutout once properly supported in the cabinet.
This undermount kitchen sink is designed for installation beneath granite, quartz, and solid surface countertops, so the bowl supports from below while the countertop edge defines the opening. A minimum 36 inch sink base cabinet is required, which sets a clear cabinet size target when laying out a run of base cabinets. The rear drain location shifts the plumbing toward the back, helping keep the front of the cabinet more open for storage. With a 10 inch deep bowl, installers can plan faucet height and surrounding backsplash clearances around the deeper working basin. The approximate 25 pound sink weight helps it sit firmly once secured to the underside of the countertop.
The Karran Workstation stainless steel sink fits projects that call for a 32 inch wide single bowl undermount sink in a 36 inch sink base cabinet. Its T304, 16-gauge stainless steel body suits kitchen environments where metal pots, pans, and sheet trays see regular use, because the heavier gauge provides a solid-feeling basin during set-downs. The 18/10 chrome-nickel composition supports resistance to oxidation and rust in normal kitchen moisture conditions, which matters when water regularly sits in the bowl around the 3-1/2 inch drain opening. Tight radius corners give the sink a contemporary look that pairs well with straight-edged stone countertops while still allowing cleaning tools to reach into the corners. The soft satin brushed finish visually complements stainless faucets and appliances, helping create a coordinated kitchen workspace.
The undermount design of this WS-37-PK2 stainless steel sink works with granite, quartz, and solid surface countertops, so fabricators can plan the cutout and edge profile to expose the 10 inch deep bowl properly. All external dimensions being approximate to 1/4 inch offers enough tolerance for stone fabrication while still allowing a snug fit within a 36 inch sink base cabinet. The rear drain location concentrates the waste outlet toward the back, which simplifies routing plumbing in a straight line and leaves more clear space at the front of the cabinet for storage. Sound absorption pads on the bowl limit ringing and vibration when dishes or cookware contact the stainless surface, supporting a more controlled work area. The single, uninterrupted bowl allows flexible positioning of racks or colanders across the full width of the sink, which helps streamline prep and cleaning tasks around the workstation area.
The Karran Workstation stainless steel sink is 32 inches wide and requires a 36 inch sink base cabinet, so cabinet layouts can be planned around that footprint.
The WS-37-PK2 sink is made from T304, 16-gauge stainless steel, giving it a thick, sturdy bowl that handles everyday kitchen use.
The sink has a 10 inch deep bowl, providing ample depth for soaking pans and handling larger cookware in a single basin.
This undermount kitchen sink is designed to be installed into granite, quartz, and solid surface countertops, aligning with common hard-surface kitchen tops.
The sink uses a rear drain location with a 3-1/2 inch drain opening, helping free cabinet space at the front and matching standard kitchen drain fittings.
The soft satin brushed finish presents a clean look while helping mask light wear, and sound absorption pads reduce noise from running water and dish contact.
The Karran Workstation stainless steel sink combines a 32 inch wide single bowl layout, 10 inch depth, and rear 3-1/2 inch drain opening in a T304, 16-gauge stainless body. Its undermount design is tailored to granite, quartz, and solid surface countertops, and it fits a 36 inch sink base cabinet. Sound absorption pads and a soft satin brushed finish support a quieter, consistent workspace around the bowl. For projects seeking a single bowl undermount solution with clear dimensional and material details, this WS-37-PK2 stainless steel sink provides a defined specification to build into your next kitchen plan.
Sold In: 1 Kit