Berenson-R.Christensen Disc Brushed Nickel 1-9/32" (32.5 mm) Diameter Knob, 6083-1BPN-C

Disc Knob Brushed Nickel For Clean Cabinet Lines

Disc knob brushed nickel from the R. Christensen by Berenson Disc Series gives a flat, circular pull point that suits modern cabinet and furniture layouts. The knob is made from zinc, so it delivers a solid metal feel that supports everyday opening and closing on frequently used doors and drawers. Its brushed nickel finish softens reflections, which helps projects match other brushed nickel decorative hardware in the same space without visual glare. The 1-9/32 inch (32.5 mm) diameter top provides a defined grip area, so fingers locate the pull consistently during use on both vertical and horizontal fronts. With a 3/4 inch base, the knob steps down cleanly to the door surface, which helps transitions look proportional across banks of fronts. The R. Christensen by Berenson branding and Disc Series collection identity support matching this knob across a full hardware plan.

Disc Series Details That Support Daily Use

• The Disc collection identity ties this knob into a coordinated series, which helps maintain a consistent design language across kitchen, bath, or built-in cabinetry runs.
• Zinc construction provides a metal body, which supports a familiar weight and feel when cabinet fronts are pulled many times per day.
• The brushed nickel finish presents a muted metallic surface, which helps hardware blend with brushed nickel hinges, faucets, and other decorative components.
• The 1-9/32 inch (32.5 mm) diameter top sets a clear contact area, which helps users grasp the knob reliably on both small and wide fronts.
• A 3/4 inch base diameter creates a stepped profile, which helps the knob visually transition from round face to door surface without an abrupt edge line.

Size, Projection, And Clearance For Cabinet Fit

This R. Christensen by Berenson Disc knob provides a 1 inch projection from the mounting surface, which sets the hand away from the door face enough for a comfortable pull stroke on doors and drawers. The 55/64 inch hand clearance dimension describes the open space available for fingers behind the knob, which supports access when installed on standard cabinet fronts. The 1-3/32 inch diameter reference supports planning where multiple knobs sit near each other or adjacent walls. Together with the 1-9/32 inch overall diameter and 3/4 inch base, these dimensions help layout spacing, alignment, and clearances so doors, drawer fronts, and nearby components operate without interference.

Using The Disc Knob In Cabinet Projects

Where This R. Christensen Disc Knob Performs Best

The Berenson-R.Christensen Disc Series brushed nickel knob functions as a decorative hardware point on cabinet doors and drawers within woodworking projects. Its 1-9/32 inch (32.5 mm) diameter suits standard cabinet front sizes, supporting use on both face-frame and frameless layouts where a round pull point is needed. The brushed nickel finish visually aligns with other brushed nickel decorative hardware and moldings, which supports cohesive appearance across kitchens, baths, and built-ins. Zinc construction positions the knob for interior cabinet environments where a metal pull is preferred over wood or plastic components. The 1 inch projection and 55/64 inch hand clearance work with common cabinet door thicknesses, helping hands engage the knob without contact against the door surface during operation.

Dimensions That Support Repeatable Layout Results

The defined 1-9/32 inch (32.5 mm) diameter allows installers to set consistent edge distances from door and drawer fronts, supporting uniform reveals across a hardware run. A 3/4 inch base diameter helps align the knob visually with rail widths and stile proportions so the footprint sits comfortably within panel geometry. The 1 inch projection provides predictable stand-off from the door face, aiding in planning around adjacent knobs and neighboring components. A 1-3/32 inch diameter reference and 55/64 inch hand clearance help translate catalog dimensions into field spacing, allowing installers to map knob positions relative to walls, tall panels, and other hardware. With the manufacturer part number 6083-1BPN-C, replacement or expansion orders can match the same Disc Series profile, finish, and size for future phases.

Common Questions About This Disc Series Knob

Choose This Knob For Coordinated Cabinet Hardware

The Berenson-R.Christensen Disc Series brushed nickel knob pairs a zinc body with defined Disc collection geometry for use on cabinet doors and drawers. Its 1-9/32 inch diameter, 1 inch projection, and 55/64 inch hand clearance support practical grip and spacing across woodworking projects. The brushed nickel finish aligns with other brushed nickel decorative hardware, simplifying visual coordination. Using manufacturer part number 6083-1BPN-C, projects can repeat this same knob style across phases for consistent results.