CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Flat Black C8060-KD-Y21

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock provides keyed security for drawers and both right-hand and left-hand doors, so one part number can be used across multiple cabinet layouts in the same project. The 1-3/4 inch cylinder length supports applications where the combined thickness of the front and frame must stay within that dimension, which helps when planning material stacks on overlay jobs. Flat black finish gives a low-profile look that blends into darker casework. This C8060-KD-Y21 model is keyed different, meaning locks are supplied to various lock numbers, which helps separate access between individual keyed locations. Key removal in both locked and unlocked positions lets installers remove the key after locking or opening, which is useful for service workflows and day-to-day use. Disc tumbler construction offers a familiar format for cabinet and fixture applications in woodworking environments.

Key Cam Lock Details That Support Your Work

• The 1-3/4 inch cylinder length provides reach through thicker fronts and frames, which suits many cabinet, fixture, and casework constructions without changing your standard materials.
• Keyed different stock keying supplies various lock numbers, which helps assign unique keys to individual drawers or doors while still using the same lock style throughout a job.
• Flat black finish on the cam lock creates a subdued appearance on dark fronts, which helps hardware visually disappear in retail fixtures or modern cabinet runs.
• Use on drawers and both right-hand and left-hand doors gives flexibility in layout, so the same lock type can be applied as plans change between hinged and sliding components.
• Key removable in both locked and unlocked positions supports workflows where users need to remove the key after setting the lock position, which is helpful in commercial or shared environments.
• Cams supplied for lipped or overlay construction and for flush construction allow the installer to match the cam extension and offset to the cabinet build style on each opening.

Cam Lock Mounting And Rotation Function In Use

The 1-3/4 inch cylinder on this C8060-KD-Y21 cam lock works where the combined thickness of front and frame does not exceed that cylinder length, so it aligns with many cabinet door and drawer constructions. Stop washers allow the cam to rotate either 90 degrees or 180 degrees clockwise or counterclockwise, giving flexibility to position the cam for the strike point you design. Cams sized for lipped or overlay fronts and for flush construction match common woodworking build-ups, so the lock body can stay the same while you select the cam reach or offset. A spur washer for wood and a mounting nut hold the cylinder, which suits typical wood-based casework materials used in the shop or on site.

Where This C8060-KD-Y21 Cam Lock Fits Best

Using The Cam Lock On Drawers And Doors

This CompX National disc tumbler cam lock is specified for drawers plus right-hand and left-hand doors, so it supports a range of cabinet types without changing hardware families. The cylinder length works with fronts and frames where their combined thickness fits within 1-3/4 inches, which matches many standard cabinet door and drawer designs. Cams are provided for lipped or overlay construction with a straight cam at 1-1/2 inch extension and for flush construction with a formed cam at 1-1/8 inch extension and 11/32 inch offset, so the cam geometry can be matched to the way the door or drawer sits against the cabinet. This gives flexibility when working across face frame, overlay, or flush casework in the same installation.

Details That Help Alignment And Rotation Control

Two stop washers on this C8060-KD-Y21 cam lock allow the cam to be set for 90 degree or 180 degree turns, clockwise or counterclockwise, so the installer can select the rotation that lines up with the strike or frame member. The ability to remove the key in both locked and unlocked positions lets the user leave the cylinder in its required position without retaining the key, which is practical for shared work areas or staffed service counters. The keyed different stock keying, described as various lock numbers, helps assign unique keys to individual lock locations while still using the same lock body and cams throughout a project. Trim washer, spur washer for wood, and mounting nut provide the mounting interface for wood-based cabinets, supporting a secure seat of the cylinder against the front material during fabrication or retrofit.

Common Questions About This Disc Tumbler Cam Lock

Select This Cam Lock For Disc Tumbler Cabinet Jobs

The CompX National disc tumbler cam lock C8060-KD-Y21 pairs a 1-3/4 inch cylinder with cams for overlay and flush construction, so it fits many cabinet and fixture layouts. Flat black finish, keyed different stock keying, and selectable 90 or 180 degree rotation support practical security setups on drawers and right-hand or left-hand doors. When a project calls for a disc tumbler cam lock that matches typical front and frame thickness while offering flexible cam rotation and construction options, this model aligns well with that requirement.