
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Jowat Purging/Flushing Agent is a hot melt cleaning agent designed to be used after running polyurethane PUR hot melt adhesive, so it clears out residual PUR from the system and keeps adhesive from remaining inside the equipment. The product is specifically described as a cleaning and purging agent, which means it runs through the same path as the polyurethane adhesive and carries uncured material out of the applicator before it can cure. This purging process keeps internal passages open for the next run and supports consistent adhesive output. The agent is supplied in slug form, which feeds through hot melt equipment like a standard hot melt, giving installers a familiar workflow when switching from adhesive to cleaning cycle. By using a dedicated hot melt cleaning agent in sequence with polyurethane PUR hot melt, technicians maintain internal cleanliness of their application equipment and support repeatable performance on future jobs.
The Jowat 930.94 hot melt cleaning agent has a stated density of 7.89 lb per gallon, which defines how much mass is delivered per unit volume and helps users relate usage to their normal hot melt melt-volume expectations. A softening range of 176 F is specified, meaning the agent transitions to a workable state at this temperature region, so equipment operators can align their melt temperature settings around this range when scheduling a cleaning cycle after running polyurethane PUR hot melt. The product color is described as red/orange, which provides a strong visual contrast against typical hot melt adhesives and helps a technician see when cleaning material appears and exits at the nozzle or applicator, supporting more controlled flushing of the system.
The Jowat Purging/Flushing Agent is described as a cleaning and purging agent to be used after running polyurethane PUR hot melt, so it is intended for hot melt equipment that processes polyurethane adhesives. In this role it follows the same flow path as the polyurethane PUR hot melt, traveling through tanks, hoses, and applicators to contact residual adhesive. Because it is a hot melt cleaning agent, it is processed in melted form inside the same hot melt application system, so it reaches internal surfaces that direct mechanical cleaning cannot reach. The red/orange color helps installers observe the agent as it enters and exits the application area, which is useful when transitioning a production line from adhesive application to cleaning cycles in woodworking or similar adhesive setups.
The web description states that a PUR cleaning agent should always be run after using polyurethane adhesive to insure that material does not cure inside the equipment and cause damage, so regular use of the Jowat 930.94 agent directly supports equipment condition and reduces the risk of blocked internal passages. By functioning as a hot melt cleaning agent, it is melted and transported through the system at operating temperature, which means it interacts with residual polyurethane PUR hot melt while that material is still in a thermoplastic or not-fully-cured state. The specified softening range of 176 F indicates the temperature region where the agent becomes effective, allowing operators to coordinate temperature profiles to keep the cleaning phase within an appropriate working window. The density of 7.89 lb per gallon gives a predictable mass for planning how much material is moved through the line during a purge, which supports consistent routines. The red/orange color further supports process visibility, so crews can see when the system transitions from adhesive to cleaning agent and back to production, aiding repeatable cleaning outcomes from run to run.
Jowat 930.94 is described as a cleaning and purging agent used after running polyurethane PUR hot melt, so it is designed specifically to flush adhesive residues from hot melt equipment.
The cleaning and purging agent is used after running polyurethane PUR hot melt, so it is applied at the end of adhesive application to remove remaining polyurethane material from the equipment.
The cleaner is red-colored for better identification, so installers can visually track the cleaning agent in the system and distinguish it from polyurethane PUR adhesive while purging.
The Jowat 930.94 cleaning agent has a softening range of 176 F, which defines the temperature region where it transitions into a workable state for hot melt equipment cleaning.
The description states a PUR cleaning agent should always be run after polyurethane adhesive so material does not cure inside the equipment and cause damage, helping maintain internal components.
The Jowat purging and flushing agent has a density of 7.89 lb per gallon, giving installers a basis to relate quantity to the volume moved through their hot melt systems.
The Jowat Purging/Flushing Agent is identified as a hot melt cleaning agent created for use after running polyurethane PUR hot melt adhesive, supporting routine cleaning of hot melt equipment. Its role as a cleaning and purging agent, combined with the specified softening range of 176 F and density of 7.89 lb per gallon, gives installers clear working parameters for their cleaning cycles. The red/orange color offers better identification in use, helping crews see when the cleaner is flowing through the system. For operations running polyurethane PUR hot melt, this Jowat 930.94 agent provides a defined method to flush adhesive from internal passages and maintain equipment readiness between jobs.
Sold In: 1 Box