Karran Profile stainless steel sink is a 31-1/2 inch wide double 60/40 bowl undermount kitchen sink designed for granite, quartz, and solid surface countertops. The sink is part of Karran's stainless steel sinks class, so it fits straight into kitchen projects where that material is required. Its undermount design works with solid countertop materials to give a clean edge transition, which matters when aligning cutouts on finished stone or solid surface tops. The sink is made from 18 gauge stainless steel, giving a material thickness that supports everyday kitchen use while maintaining a consistent look with other stainless components. It is a stainless steel undermount kitchen sink with two bowls in a 60/40 layout, so it supports multi-tasking at the sink area, such as separating prep and clean-up zones in the same cutout.
This Karran undermount kitchen sink is used for undermounting in granite, quartz, and solid surface countertops, so it is intended for installations where the sink is secured beneath solid deck materials rather than dropped in from above. The sink width of 31-1/2 inches sets the overall footprint, so it guides cabinet sizing, support planning, and countertop cutout layout in the project. All external dimensions are approximate to 1/4 inch, so fabrication and installation workflows can factor in that tolerance during layout and cutting. The 18 gauge stainless steel construction defines the sink material thickness, which matters when coordinating with mounting methods and when aligning the sink edge to the underside of the chosen countertop material.
The Karran Profile 31-1/2 inch wide stainless steel undermount kitchen sink with double 60/40 bowl works in kitchen layouts that call for a stainless steel undermount unit under granite, quartz, or solid surface countertops. Because it is specifically used for undermounting in these materials, it fits projects where the countertop is fabricated from stone or solid surface sheets and the sink is attached from below the deck. The stainless steel sink category places this unit in kitchen and bath cabinet accessory work, so it aligns with cabinet-based installations where the sink mounts over a sink base cabinet. As a double 60/40 bowl configuration, it serves installations that benefit from two working bowls with different sizes, supporting task separation at the same sink centerline.
The material of 18 gauge stainless steel sets a consistent wall thickness for the PU23R undermount kitchen sink, which affects how the sink edge meets the underside of granite, quartz, or solid surface countertops. That consistency matters when applying an undermount installation method, because the sink rim must sit flat against the deck underside for a uniform reveal or flush fit. All external dimensions being approximate to 1/4 inch gives a known tolerance range, so templating and cutting practices can be based on the specified 31-1/2 inch width with room for that variation. The stainless steel sinks product class identifies this unit as part of a broader stainless program, which supports projects that want a coordinated stainless appearance at the sink zone. Because the sink is sold in 1 per pack, each unit is treated as a single sink for planning quantity on multi-kitchen or multi-unit jobs.
The Karran Profile stainless steel undermount kitchen sink has an overall width of 31-1/2 inches, which guides cabinet selection and countertop cutout sizing in kitchen installations.
The PU23R stainless steel sink is used for undermounting in granite, quartz, and solid surface countertops, so it installs from below the deck rather than sitting on top.
This Karran undermount kitchen sink is used for undermounting in all granite, quartz, and solid surface countertops, so it is aimed at solid, non-laminate deck materials.
The sink material is 18 gauge stainless steel, giving a defined stainless thickness that suits everyday kitchen sink use and coordinates with other stainless fixtures.
All external dimensions for this stainless steel sink are approximate to 1/4 inch, so layout and fabrication can account for a plus or minus 1/4 inch tolerance.
The Karran Profile PU23R undermount kitchen sink is a double 60/40 bowl design, allowing two separate stainless steel work areas within one 31-1/2 inch sink width.
The Karran Profile stainless steel sink with double 60/40 bowl layout and 31-1/2 inch width provides an 18 gauge stainless undermount option for granite, quartz, and solid surface countertop projects. Its use for undermounting in these specific materials, combined with external dimensions approximate to 1/4 inch, supports countertop fabrication and cabinet layout planning. For kitchen work requiring a stainless steel undermount sink in the PU23R configuration, this unit offers a defined product identity and material that align with stone and solid surface installations.
Sold In: 40 Each