Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Karran Select SU73 is a 16-gauge stainless steel undermount kitchen sink with a single bowl, sized to fit a 24-inch minimum cabinet and designed to mount beneath granite, quartz, or solid surface countertops.
One uninterrupted basin handles everything from soaking large pots to rinsing produce without the divider of a double-bowl sink getting in the way. Because it mounts from below the countertop, the surface runs flush to the bowl edge with no rim to clean around and no lip to catch water. The open interior is wide enough for sheet pans and cutting boards, and the 8-1/4-inch depth gives room for tall stockpots without water splashing over the edge.
The Select series SU73 is made from 16-gauge stainless steel, a noticeably heavier sheet than the 18-gauge material common in builder-grade sinks. The extra thickness reduces flex under load and dampens sound when water or dishes contact the bowl. The stainless finish reads clean against both light and dark countertop colors and is straightforward to wipe down after use.
This sink is a practical match for a kitchen remodel or new build where the countertop is being fabricated in granite, quartz, or solid surface and the base cabinet is 24 inches or wider. It suits a compact single-sink kitchen, a secondary prep area, or any layout where a single large bowl is more useful than two smaller ones. Because it is an undermount, it is planned into the countertop during fabrication rather than dropped into an existing cutout, so it belongs in a new-counter project rather than a direct swap for a drop-in.
It is designed to undermount into granite, quartz, and solid surface countertops. It is not intended for laminate or tile installations.
A lower gauge number means thicker steel. The 16-gauge bowl is heavier and stiffer than an 18-gauge sink, which reduces flex under load and cuts down on sound when the bowl takes impact.
No. Undermount sinks are installed during countertop fabrication and require the counter to be cut and bonded to the sink rim from below. A swap from drop-in to undermount means replacing the countertop as well.
The sink requires a minimum 24-inch wide base cabinet. Confirm the cabinet depth against the 17-1/4-inch front-to-back dimension before ordering.
Choose the Karran Select SU73 when the project calls for a thick-gauge stainless single bowl that mounts cleanly under a hard countertop and gives a full, unobstructed basin for everyday kitchen work.
Sold In: 1 Each
