Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SawStop 10 inch portable table saw gives you a 10 inch blade, so installers and woodworkers can handle typical ripping and crosscutting while staying on a compact footprint that fits tight home or job site spaces. The saw is corded at 120 V with a 15A motor, which delivers consistent power from standard job site circuits for cutting through typical sheet goods and construction lumber without relying on batteries. SawStop's patented safety system stops the spinning blade on contact with skin and drops it below the table in less than 5 milliseconds, which turns a moment of contact into a rapid shutdown that helps reduce the severity of accidental blade contact during repetitive or close-tolerance cuts. The compact table saw format keeps everything centered around a flat table surface, supporting accurate setups for straight, repeatable cuts.
The SawStop CTS-120A60 operates on 120 V power, so it plugs into standard circuits commonly found in home garages and job sites, simplifying setup near typical outlets. The 15A corded design means the saw draws a steady load through the cord, allowing installers to plan placement around available circuits and extension runs while maintaining consistent blade speed during cuts. The compact table saw layout keeps the 10 inch blade centered in a stable table surface, helping operators set up rip fences and bevel angles with predictable reference points. A carry handle built into the saw body makes lifting and positioning the saw on benches or stands more manageable, supporting solo setup or frequent moves between rooms and work zones.
The SawStop compact table saw is described as portable, which positions it well for both at-home projects and job site work where tools need to move frequently between vehicles, floors, and rooms. Heavy-duty construction that is built to last provides the stability needed for smooth cuts on the job site, so installers working on cabinets, trim, or framing can rely on a solid table when pushing larger panels or boards through the 10 inch blade. The compact size works in garages, small shops, and tight renovation spaces where a full-size cabinet saw would be difficult to position, while still giving enough table area for controlled feed and fence support. With the blade stopping and dropping below the table in less than 5 milliseconds on skin contact, this saw brings SawStop's patented safety system into environments where people are working close to the blade all day, supporting safer workflows when multiple cuts and setups run back to back.
The rack and pinion fence on the SawStop compact table saw is easy to adjust or remove and always square, which helps installers set accurate rip widths quickly and trust that the fence will stay parallel to the 10 inch blade during long cuts. Its built-in high and low shelf supports all types of cuts, so users can stabilize narrow, short, or taller pieces against the fence without improvising support, leading to straighter edges and fewer re-cuts. The quick-tilt bevel with micro adjustments lets operators quickly and easily tilt the blade to the desired angle, then refine that angle in 1 degree increments using the micro tilt-adjust feature, which is useful when dialing in tight-fitting miters or bevel joints where small deviations show up in the finished work. Heavy-duty construction contributes to portable durability that is built to last, so the table and mechanisms maintain alignment through transport and daily use, helping keep fence settings, bevel angles, and blade alignment consistent from job to job. The compact size, carry handle and on-saw storage keep the saw organized and ready to move, reducing downtime between setups and helping crews or serious DIY users stay focused on cutting instead of handling extra tool movements.
The SawStop compact table saw is described as portable and suited for work at home or on the job site, so it supports both shop projects and mobile installation work.
The SawStop safety system stops the spinning blade on contact with skin and drops it below the table in less than 5 milliseconds, reducing severity of accidental contact during cutting.
The SawStop 10 inch portable table saw is a corded unit rated at 15A and 120 V, so it runs from standard electrical circuits commonly found in homes and job sites.
The rack and pinion fence is easy to adjust or remove and always square, with high and low shelf support, helping maintain straight, repeatable rip cuts on varied workpieces.
The CTS-120A60 has a quick-tilt bevel with micro adjustments, allowing rapid blade tilting and fine-tuning bevel angles in 1 degree increments for precise miter and bevel work.
The saw uses heavy-duty construction described as portable durability that is built to last, providing stability for smooth cuts and reliable performance in job site conditions.
The SawStop CTS-120A60 compact table saw combines a 10 inch blade, 15A 120 V corded power, and SawStop's patented safety system into a format ready for home or job site work, so installers and serious DIY users can bring accurate, safer cutting wherever the job is. Heavy-duty construction, a rack and pinion fence that is always square, and a quick-tilt bevel with micro adjustments support clean, repeatable results across framing, cabinetry, and trim tasks. Choose this SawStop compact table saw when you need portable durability, precise adjustment, and integrated safety in a single job-ready saw.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WXCTS-TSI Mfr# CTS-TSI | SawStop CTS-TSI Compact Table Saw Standard Zero Clearance Insert |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WXCTS-FS Mfr# CTS-FS | SawStop CTS-FS Compact Table Saw Folding Stand |
