Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice F70 15 inch undermount drawer slides provide a full extension slide with a synchronized mechanism, so drawers travel their entire length in a smooth, controlled motion that supports access to the full drawer depth. The soft closing action is enhanced, which slows the drawer as it closes and helps protect fronts, stops, and interiors from slam impact in everyday use. A 150 lbs dynamic load capacity means the slide is rated to carry significant moving loads, which matters when drawers are filled with hardware, tools, or dense materials. The 170 lbs static load capacity supports heavier stored weight at rest, helping the slide support loaded drawers without sag in typical cabinet applications. These Salice America slides are 100% made in Italy, which reflects the manufacturing origin for buyers standardizing on specific sources. The slides are designed for 12 mm to 16 mm drawer thickness, letting builders match common 1/2 inch to 5/8 inch side materials to the hardware specification.
These undermount drawer slides use elongated holes for depth and height adjustments, which lets the slide position shift slightly during installation to correct alignment and set reveals correctly relative to cabinet faces. Integrated tool free height adjustments of plus 2.5 mm on the clips provide quick vertical tuning at the drawer connection, supporting consistent top and bottom gaps across a bank of fronts. Tool free depth adjustments of plus or minus 3 mm let the drawer move in or out relative to the cabinet, helping achieve a flush or stepped front position according to the design. Tool free side adjustments of plus or minus 1.5 mm allow limited lateral movement, which helps correct small racking issues between left and right gaps. An optional tool free tilt adjustment of plus 3 mm introduces controlled angle change, useful for aligning top edges on taller fronts. The slides are specified for drawer thickness from 12 mm to 16 mm, so standard 1/2 inch to 5/8 inch material can be used within the designed clamping and clip tolerances.
These Salice America F70 15 inch soft close full extension undermount drawer slides are classified as undermount drawer slides, so they install beneath the drawer box and support a clean side appearance in finished cabinetry. The face frame reference in the description indicates use in cabinets built with face frames, aligning with common North American construction for kitchens, baths, and built-ins. The 15 inch length suits medium-depth drawers, which are typical in base cabinets, utility pullouts, or shop storage where full access to contents is needed. The rated dynamic load capacity of 150 lbs allows the slides to carry substantial live loads while the drawer is moving, which is useful when specifying drawers for dense items such as fasteners or small parts. The 170 lbs static load capacity supports drawers that remain loaded over time, helping planners match slide choice to the expected stored weight in each opening.
The full extension slide with synchronized mechanism guides both members together, which supports stable movement and alignment when drawers are opened fully under load. Enhanced smooth soft closing action engages near the back of travel, which helps bring the drawer front gently against the cabinet and supports uniform closing feel across a bank of drawers. Elongated holes for depth and height adjustments at the cabinet member simplify achieving repeatable setbacks and level mounting, which can reduce layout time when installing multiple slides in the same run of cabinetry. Adjustable clips that allow easy drawer insertion and removal help installers test fit and then pull drawers for finishing or site work without disturbing slide positions. The special clip for narrow drawers means the same slide platform can serve smaller drawers, supporting consistent hardware choice across a project. Integrated tool free height, depth, side, and optional tilt adjustments within the specified ranges give precise control of reveals, which matters for aligning complex fronts or handling slight variations in cabinet or drawer construction.
The UBF70FFSC-15 is a Salice F70 soft-close full extension undermount drawer slide, which mounts beneath the drawer to support concealed hardware and smooth travel.
These slides are 15 inch undermount models designed for drawer thickness from 12 mm to 16 mm, matching common 1/2 inch to 5/8 inch side materials in cabinet construction.
These Salice F70 slides have a 150 lbs dynamic and 170 lbs static load capacity, supporting heavier drawer contents during movement and at rest in typical cabinet applications.
The Salice F70 system offers tool free height, depth, and side adjustments within the stated millimeter ranges, plus optional tilt adjustment, helping fine tune drawer alignment and reveals.
Elongated holes in the slide provide depth and height adjustment at the cabinet mounting points, allowing minor shifts to correct level and setback while keeping the same fastener positions.
These Salice F70 undermount drawer slides are 100% made in Italy, which identifies their manufacturing origin for buyers standardizing on specific production sources.
Salice F70 15 inch undermount drawer slides combine full extension travel, enhanced smooth soft closing action, and 150 lbs dynamic load capacity, so they match medium-depth drawers that carry significant weight and still need controlled, quiet operation. The 12 mm to 16 mm drawer thickness range supports common side materials, which helps align hardware selection with standard shop construction. Integrated tool free adjustments for height, depth, side, and optional tilt give fine control over reveals, which supports consistent front alignment across banks of drawers. By choosing the UBF70FFSC-15 model from Salice America, buyers match a specific length and load rating to planned cabinetry and storage layouts.
Sold In: 1 Set