Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
F70 adjustable front locking devices are Salice America components designed for use with narrow drawers, so they secure the drawer front to the F70 runners in tight cabinet layouts. This front locking device works with all F70 runner versions, giving installers one consistent solution across different drawer configurations while keeping layout decisions straightforward. The narrow mount design positions the locking point to suit slim drawer sides, which helps maintain proper alignment where standard mounts would not fit as cleanly. The product serves both left and right mounting positions, so one part number supports either side and simplifies planning on multi-drawer runs. As a drawer slides accessory, this locking device connects the drawer front to the slide system, which supports accurate operation of the F70 runners in everyday use.
This Salice America front locking device is applied as a narrow mount part on the drawer front, which suits drawer constructions where space at the sides is limited. The requirement that the overhang must be 13 mm, or 1/2 inch, defines how far the drawer front should extend beyond the drawer box to engage the mechanism correctly. That set dimension guides both cabinet design and on-site layout, so drawer fronts line up with the F70 runner interface. With pre-drilling recommended at 2.5 mm, or 3/32 inch, the installation process is prepared for clean fastener entry into the substrate, which supports accurate positioning. Using this locking device with all F70 runner versions keeps the mounting approach consistent across a full bank of drawers and supports efficient, repeatable workflows.
The Salice America F70 adjustable front locking devices are specified for use with narrow drawers, so they fit situations where drawer side material and clearances leave limited room for hardware. As a narrow mount component, the UBF70CLIP-NLR positions the locking function toward the front in a way that accommodates this slimmer construction, helping the drawer front connect positively to the F70 runners. Because the device is designed for all F70 runner versions, it can be used whether the project calls for different lengths or load capacities within that runner family, allowing banks of drawers to share a unified locking approach. The left right front locking device function means both sides of a drawer assembly are addressed by the same style of component, which supports balanced engagement on the runners and stable drawer travel.
The requirement that the overhang must be 13 mm, equivalent to 1/2 inch, gives a fixed reference for how the drawer front should project relative to the drawer box when using this F70 front locking device. That dimension directly affects how the locking elements meet the runners, so following it helps deliver consistent reveals and smooth motion across multiple drawers. The recommendation for pre-drilling at 2.5 mm, or 3/32 inch, shapes the drilling pattern and bit choice, so the fasteners enter cleanly and the locking device seats firmly against the drawer front without shifting. Applied as a drawer slides accessory within the Salice Progressa F70 system, this locking device contributes to how the runners pick up the drawer load, which supports steady performance over time. The combination of narrow mount layout, 13 mm overhang, and defined pre-drill size provides clear reference points that streamline both shop production and on-site fitting when using F70 runners.
The F70 adjustable front locking devices are designed for use with narrow drawers, so they match drawer box constructions where side space is limited and a narrow mount layout is required.
The UBF70CLIP-NLR front locking device is for all F70 runner versions, so it serves across the Salice F70 runner family within the specified narrow drawer applications.
The F70 locking device specifies an overhang that must be 13 mm, or 1/2 inch, which sets the projection of the drawer front so it engages properly with the runners.
The Salice F70 front locking device recommends pre drilling at 2.5 mm, or 3/32 inch, so the mounting holes match the hardware sizing and help position the device accurately.
The F70 adjustable front locking devices are described as left right front locking device components, so the same style serves both sides of the drawer front.
The SAP description lists PROGRESSA LH/RH MOUNT NARROW FLD, indicating this locking device is part of the Salice Progressa F70-style narrow front locking arrangements.
The Salice America F70 adjustable front locking devices narrow mount, part number UBF70CLIP-NLR, give a defined approach to securing narrow drawers to all F70 runner versions. With the 13 mm overhang requirement and 2.5 mm pre-drilling recommendation clearly stated, this front locking device provides specific layout and drilling references that support efficient cabinet shop production and field installation. For projects built around the Salice Progressa F70 system and narrow drawer construction, this drawer slides accessory offers a focused way to align drawer fronts and engage the runners consistently across each bank.
Sold In: 1 Set