Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand cabinet member of the Hettich Quadro 25 undermount drawer slide in the 350mm length — a concealed, partial-extension runner with integrated soft-close, steel ball bearings, and a 48.5 lb capacity per pair, made for frameless cabinets and drawer sides up to 5/8 inch thick.
At 350mm, this is a compact slide sized for shallower drawers — think bathroom vanity drawers, bedroom furniture, small base cabinets, and utility drawers where a full 18-inch or longer slide would not fit the cabinet depth. The partial-extension travel suits spaces where the drawer does not need to clear the cabinet opening completely, and the soft-close damper makes it a practical upgrade over a plain roller or basic self-closing runner in the same footprint. The 48.5 lb capacity per pair handles everyday storage loads comfortably in these applications.
The Quadro 25 runs on steel ball bearings in formed raceways, which gives it a noticeably smoother pull than nylon-roller Euro slides in the same class. The zinc finish over steel is a functional indoor finish — it protects the members through normal service without adding thickness or interfering with the drawer box fit. Because this is a concealed undermount, the finish is largely hidden beneath the drawer once installed.
Cabinet shops building frameless bedroom, bath, or office casework with shallow drawers will find the 350mm Quadro 25 a practical match — particularly when the job calls for soft-close in a size range where premium full-extension models are more slide than the cabinet depth allows. Furniture makers working with Euro-style frameless boxes and designers specifying handle-less or minimalist fronts where soft-close matters are also natural fits. Because the Quadro 25 sells as handed singles, production shops typically stock left-hand and right-hand members in equal counts and pick to order.
This is the left-hand cabinet member only. You need one left-hand and one right-hand slide to make a working pair for a single drawer.
The slide is sized for drawer sides up to 5/8 inch thick. Build the drawer box to Hettich's published specification for the Quadro 25 series, including the correct box width, bottom recess, and rear notch — the drawer box must match the slide's spec to seat and lock correctly.
This SKU is specified for frameless cabinets, where the slide mounts directly to the flat interior side panel. For face-frame installations, check whether a face-frame version or rear mounting brackets are available in the Quadro 25 series before ordering.
This is a partial-extension slide. The drawer opens to a useful working depth but the rear portion of the box remains inside the cabinet at full travel. It is not a full-extension model.
Quadro series front locking devices and rear brackets are series-specific accessories. Confirm which locking clips and any required brackets are needed for your installation before ordering, as these are typically sold separately.
Match the 350mm length to your drawer depth, stock the left-hand and right-hand members in equal quantities, and add the Quadro 25 series locking devices your installation requires — and this concealed soft-close runner is ready to go to work in the cabinet.
Sold In: 30 Each